Speed Queen Washer Dryer: not draining properly

Professional Repair Guide

What is this symptom?

Is your Speed Queen Washer Dryer not draining properly? This issue may leave your laundry soaked, as it fails to pump out water at the end of the wash cycle. Common causes include a clogged drain hose, a faulty drain pump, or issues with the control board. Understanding these symptoms can help you troubleshoot effectively.

Urgency: Medium

Important Tips for Speed Queen Models

  • Some models use commercial‑grade parts and may have a coin trap or specific pump configurations that require model‑specific parts.

Possible Causes

Clogged drain hose

How to Identify: Water remains in tub; hose may be kinked or blocked with lint/debris.

Part: Drain hose

Obstructed or faulty drain pump

How to Identify: Water stays after cycle; unusual noises from pump area; pump impeller blocked by debris or small objects.

Part: Drain pump

Faulty control board or timer failing to power pump

How to Identify: Pump doesn’t run during drain cycle; multimeter shows no voltage to pump.

Part: Control board/Timer

Lid switch or door latch failure

How to Identify: Machine won’t progress to drain/spin; no “click” when lid closes.

Part: Lid switch/door latch assembly

Foreign items trapped in coin trap or internal hoses

How to Identify: Small items (coins, pins found in trap during inspection; water won’t exit tub.

Part: Coin/trap filter or internal hose

DIY Solutions

Clean and inspect drain hose

Moderate 15–30 minutes
Tools Needed: screwdriver, bucket, brush or plumbers snake
  1. Unplug washer.
  2. Detach drain hose from back and inspect for kinks.
  3. Run a brush or plumber’s snake through hose to clear debris.
  4. Reattach hose securely and test a drain cycle.
⚠️ Safety First: Ensure power is disconnected before working on machine.

Check and clear drain pump

Advanced 30–60 minutes
Tools Needed: screwdriver, bucket, pliers
  1. Disconnect power.
  2. Gain access to bottom panel and locate drain pump.
  3. Remove pump and inspect for debris or trapped objects.
  4. Clear any blockages and reassemble.
  5. Run test cycle.
⚠️ Safety First: Take care to catch water; unplug appliance.

Test lid switch continuity

Advanced 20–40 minutes
Tools Needed: multimeter, screwdriver
  1. Disconnect power.
  2. Access lid switch assembly.
  3. Use multimeter to check for continuity when lid is closed.
  4. Replace switch if no continuity present.
  5. Reassemble and test.
⚠️ Safety First: Electrical testing requires care and proper handling.

Professional Repairs

Replace drain pump

Estimated Cost: $80 - $200

Control board or timer replacement

Estimated Cost: $150 - $400

Replace lid switch or latch

Estimated Cost: $50 - $150

When to Call a Professional

Pump does not run at all or hums without draining
Control board or electrical faults suspected
DIY inspection reveals damaged components

Preventive Maintenance

  • Inspect drain hose for kinks and debris: Drain clogs and backups
    Frequency: every 3 months
  • Run occasional maintenance wash with no clothes and a hose flush: Accumulation of lint and debris
    Frequency: monthly

Frequently Asked Questions

Why is my Speed Queen Washer Dryer not draining properly?
Common causes include clogged drain hoses, obstructed drain pumps, or faulty control boards.
How do I fix Speed Queen Washer Dryer not draining properly myself?
Inspect the drain hose for clogs, check the drain pump for debris, or test the lid switch for continuity.
How much does it cost to fix not draining properly?
Professional repair costs typically range from $50 to $400, depending on the issue.
When should I call a technician for not draining properly?
If DIY solutions fail or if the issue involves complex components like the control board, it's best to consult a technician.

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Clogged drain hose or pump filter
  • Faulty drain pump
  • Blocked or kinked drain hose

User Suggested Solutions

  1. Check and clear the drain hose and pump filter. First, unplug the washer. Remove the drain hose from the back and inspect for clogs. Clean the pump filter located at the front bottom of the washer. Reattach everything and test the machine.

  2. Inspect the drain pump for functionality. If the pump is making unusual noises or not running, it may need to be replaced. Disconnect power, access the pump, and test it with a multimeter. Replace if faulty.

  3. Check the drain hose for kinks or blockages. Ensure the hose is not bent or pinched and is installed correctly at the drain. Adjust or replace as necessary.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. It’s that time again: washer/dryer recommendations?

Community Discussions

washing machine has been getting noisier and has started not getting enough water out of the load

Recommendations for Speed Queen TC5 and LG front loader 4000 series for better cleaning and longevity.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!