Miele Washer Dryer: smoke from drum, squeaking noise
What is this symptom?
Experiencing smoke from the drum and a squeaking noise in your Miele washer-dryer combo? This critical issue may indicate overheating, worn parts, or motor failure. Immediate attention is necessary to prevent further damage and ensure safe operation.
Important Tips for Miele Models
- Official Miele support pages list noise troubleshooting but do not directly address smoke; noise may require professional service. Miele dryers can have worn bearings and drum supports specific to models. (
Possible Causes
Drive belt slipping, worn or damaged
How to Identify: Burnt rubber smell, visible smoke near drum edge, belt fray or damage on inspection.
Part: Drive belt
Motor overheating or failure
How to Identify: Smoke with burnt electrical smell; machine struggles to spin or turn drum by hand; loud noises.
Part: Motor / motor coupling
Worn or failing drum support components (rollers/bearings)
How to Identify: Squeaking or grinding noise increases during drum rotation; difficulty turning drum by hand; noise more pronounced as machine warms up.
Part: Drum rollers, bearings, felt glides
Lint/foreign objects causing restricted movement or overheating
How to Identify: Noise or smoke accompanied by rattling, visible debris in drum or lint traps.
Part: Drum interior/pump/vent path
DIY Solutions
Inspect drum belt and visible components
- Unplug unit and ensure power is off.
- Remove access panel to view drum belt area.
- Inspect belt for signs of fraying, melting, or slipping.
- If belt damage visible, obtain correct Miele replacement and install per service manual guidance.
Clean lint traps, drum interior, and check for foreign objects
- Unplug unit or ensure it is off.
- Remove lint trap and clean thoroughly.
- Inspect drum interior for coins, bra wires, or debris.
- Vacuum around drum seals and accessible vent area to reduce lint build-up.
- Run a short test cycle to see if noise persists.
Next step
Choose the next step for smoke from drum, squeaking noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Washer Motor Coupling
Transfers motor power to the washer transmission on models that use a direct-drive coupling.
Dryer Drum Roller
Supports the dryer drum and lets it rotate smoothly inside the cabinet.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace motor or motor coupling
Replace worn drum support components
When to Call a Professional
Preventive Maintenance
-
Clean lint filter and vent path: Lint buildup that contributes to overheating and smoke
Frequency: every load for lint filter, annual vent inspection -
Inspect belts and rollers annually: Excessive wear leading to noise and failure
Frequency: annually
Frequently Asked Questions
Why is my Miele Washer Dryer smoke from drum, squeaking noise?
How do I fix Miele Washer Dryer smoke from drum, squeaking noise myself?
How much does it cost to fix smoke from drum, squeaking noise?
When should I call a technician for smoke from drum, squeaking noise?
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged drum bearings causing friction and overheating.
- Foreign objects trapped in the drum or between the drum and the tub.
- Faulty motor or drive belt leading to abnormal operation and smoke.
User Suggested Solutions
-
Inspect and replace the drum bearings. Disconnect the washer dryer from power, remove the front panel, and access the drum. Check for wear and replace if necessary.
-
Check for and remove any foreign objects. Open the door and inspect the drum for items like coins or small clothing pieces that may be causing the noise.
-
Examine the motor and drive belt for damage. If the belt is worn or the motor is malfunctioning, replace them as needed. This may require disassembling the unit.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!