Miele Dishwasher: need replacement part

Professional Repair Guide

What is this symptom?

Experiencing issues with your Miele dishwasher? You may need to replace a faulty part to restore its functionality. Common culprits include worn mechanical parts, pump failures, damaged door seals, or control board issues. Identifying the right replacement part is crucial for effective repairs.

Urgency: Medium

Important Tips for Miele Models

  • Miele offers genuine spare parts for many mechanical components and guarantees availability for up to 15 years after production ends; parts can be ordered through official channels.

Possible Causes

Wear and tear of mechanical parts over time

How to Identify: Visual inspection reveals broken/brittle plastics, clogging, or missing pieces; reduced performance (e.g., poor cleaning or difficulty moving racks.

Part: Spray arms, filters, racks, seals, rollers

Faulty drain pump or circulation pump

How to Identify: Dishwasher fails to drain or pump noises, water pooling at bottom after cycle; error codes like F11. (Miele Repair SF

Part: Drain pump / circulation pump assembly

Damaged door seal or latch

How to Identify: Water leakage during cycles; door not closing securely; visible deterioration of rubber seal or plastic latch. (Miele Repair SF

Part: Door gasket / latch mechanism

Control panel or electronic component failure

How to Identify: Dishwasher unresponsive, displays not working, or error codes without other mechanical symptoms. (Miele

Part: Control board, buttons or interface panel

DIY Solutions

Replace easily removable parts (filters, spray arms, seals)

Moderate 15–45 minutes
Tools Needed: Screwdriver, Gloves
  1. Identify faulty part (e.g., filter, spray arm, gasket) based on symptom and visual check
  2. Order correct OEM part matching model number
  3. Disconnect power to dishwasher
  4. Remove old part per manual (e.g., twist off filter, unclip spray arm)
  5. Install new part ensuring secure fit
  6. Restore power and test operation
⚠️ Safety First: Disconnect power before accessing interior

Use parts diagram for accurate part identification

Easy 10–20 minutes
Tools Needed: Model manual or parts diagram
  1. Locate dishwasher model number (inside door frame)
  2. Find corresponding parts diagram / schematic
  3. Match symptom and part location to identify exact part number
  4. Use this info when ordering replacement part

Professional Repairs

Pump assembly replacement

Estimated Cost: $150 - $400

Control board or electronic module replacement

Estimated Cost: $200 - $600

Door latch / seal assembly replacement

Estimated Cost: $50 - $150

When to Call a Professional

Dishwasher displays recurring error codes unresponsive to simple maintenance
Drainage or cycle failures persist after basic part replacement
Electrical or control board issues suspected
Leaks causing floor damage or water under dishwasher

Preventive Maintenance

  • Clean filters and spray arms regularly: Clogs leading to performance issues and less need for part replacement
    Frequency: monthly
  • Inspect seals and gaskets: Leaks and water damage requiring replacement components
    Frequency: annually

Frequently Asked Questions

Why is my Miele Dishwasher need replacement part?
Common causes include wear and tear of parts, faulty drain or circulation pumps, and control board failures.
How do I fix Miele Dishwasher need replacement part myself?
Identify the faulty part via visual checks, order the correct OEM replacement, and follow DIY guidelines for easy fixes.
How much does it cost to fix need replacement part?
Professional repairs can range from $50 to $600 depending on the part and complexity of the repair.
When should I call a technician for need replacement part?
Consider professional help if the repair involves complex components like the pump assembly or control board.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Faulty pressure switch causing improper water level detection
  • Clogged or damaged pressure hose affecting pressure switch performance
  • Electrical issues such as damaged wiring or connectors leading to switch failure

User Suggested Solutions

  1. Replace the faulty pressure switch. Disconnect the dishwasher from power, remove the lower spray arm, and access the pressure switch. Detach the old switch, install the new one (MIELE part number 6996821), and reassemble the dishwasher.

  2. Check and clear any clogs in the pressure hose. Disconnect the hose from the pressure switch and inspect for blockages. Clean or replace the hose as necessary before reattaching.

  3. Inspect electrical connections to the pressure switch. Ensure that all wiring is intact and securely connected. Repair any damaged wires or connectors before testing the dishwasher.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Looking for replacement pressure switch for a miele dishwash...

Community Discussions

Looking for replacement pressure switch

MIELE part number 6996821

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!