Maytag Gas Oven: not heating

Possible Causes

Failed oven igniter (most common for gas models)

How to Identify: Igniter does not glow orange within ~90 seconds after selecting bake, glows faintly, or draws insufficient current to open gas valve; oven doesn’t light.

Part: Hot surface igniter / glow bar igniter

Gas supply or gas valve problem

How to Identify: No gas reaching burner; confirm main gas valve is open; if igniter glows but flame doesn't ignite. (家居必备指南

Part: Oven gas valve / gas line

Temperature sensor or thermostat malfunction

How to Identify: Oven fails to reach/maintain set temp or repeatedly cycles oddly; sensor resistance out of expected range on multimeter.

Part: Oven temperature sensor or thermostat

Control board electrical failure

How to Identify: Display errors, no power to heating circuit, burned components visible, no response to control inputs.

Part: Oven control board

DIY Solutions

Inspect and observe oven igniter operation

Easy 5–10 minutes

Tools Needed: eye protection

1. Set oven to bake and open door/window to observe inside.
2. Watch if the igniter glows orange within 60–90 seconds.
3. If igniter does not glow or glows weakly, it likely needs replacement.

⚠️ Safety First: Do not touch components when hot.

Ensure gas supply is active to oven

Easy 5 minutes

1. Locate main gas shutoff valve to the oven and ensure it’s fully open.
2. Confirm stovetop burners' gas flow to verify overall supply.
3. If gas is off or interrupted, restore supply and test oven.

⚠️ Safety First: If you smell gas, stop immediately, ventilate, and call a professional.

Next step

Choose the next step for not heating

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Hot Surface Igniter

Heats until it can ignite gas released by the burner valve in ovens and gas dryers.

Typical part-only price

$20 - $65

DIY difficulty

Medium

Estimated time

20-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Gas Valve

Controls the flow of natural gas or propane to the burner jets.

$60 - $140 · Hard · 45-60 mins

Check fit & price

Possible related component

Thermostat

Regulates temperature by turning the heating or cooling system on or off.

$15 - $40 · Easy · 15-30 mins

Check fit & price

Possible related component

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

$15 - $35 · Easy · 15-30 mins

Check fit & price

Model number required

Model-compatible Gas Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Replace oven igniter

Estimated Cost: $50–$150 for part; $150–$300 installed

Service gas valve or supply line

Estimated Cost: $150–$400

Replace temperature sensor or control board

Estimated Cost: $60–$200 for sensor; $200–$500 for control board

When to Call a Professional

You detect a gas odor or suspect a gas leak

Igniter tests show failure and you’re uncomfortable replacing it

Gas valve or internal gas lines require service

Control board or complex electrical issues are suspected

Preventive Maintenance

• Regularly inspect and clean oven interior and igniter area: Dirt buildup that may impair igniter performance
  Frequency: every 3–6 months
• Check and replace temperature sensor if erratic: Incorrect temperature readings leading to heating issues
  Frequency: annually

Frequently Asked Questions

Why is my Maytag Gas Oven not heating?

The main reasons include a failed oven igniter, gas supply problems, or a malfunctioning thermostat.

How do I fix Maytag Gas Oven not heating myself?

Check if the igniter glows orange when the oven is set to bake. Ensure the gas supply is fully open.

How much does it cost to fix not heating?

Repair costs range from $50–$150 for igniter replacement to $200–$500 for control board issues.

When should I call a technician for not heating?

If DIY checks don’t resolve the issue or if the problem involves gas supply, it’s best to consult a professional.

References & Sources

• Maytag: Why Is My Oven Not Getting Up To Temperature? Official

Common Issues Reported by Users

• Igniter issues (2 mentions)
• Gas valve problems (1 mentions)

User Suggested Solutions

1. Check the broil igniter for voltage; replace if weak or bad.

Community Discussions

not broiling

Check the broil igniter for voltage; replace if weak or bad.

DIY View on Reddit →

Source: Reddit r/appliancerepair