Magic Chef Gas Oven: not heating

Possible Causes

Faulty oven igniter (weak or non-igniting)

How to Identify: No or weak orange glow when oven set to heat; oven fails to light the burner within ~90 seconds.

Part: Oven igniter

Closed or insufficient gas supply to oven

How to Identify: Surface burners not working either or gas supply valve not fully open; confirmed external gas supply issues.

Part: Gas supply valve/line

Faulty safety (gas) valve

How to Identify: Igniter glows but gas won’t flow; multimeter shows no continuity.

Part: Oven safety valve

Loose, damaged, or burnt wiring

How to Identify: Visual evidence of burnt wires near igniter or safety valve.

Part: Igniter/safety valve wiring

Oven control board failure

How to Identify: No voltage sent to igniter or valves; other causes have been ruled out.

Part: Oven control board

DIY Solutions

Inspect and test oven igniter

Moderate 30–60 minutes

Tools Needed: screwdriver, multimeter

1. Disconnect oven from power and gas supply
2. Access the oven igniter assembly
3. Visually inspect for cracks or damage
4. Turn oven on and watch inside for igniter glow; test continuity with multimeter

⚠️ Safety First: Turn off gas and electrical supply before access

Verify gas supply valve and piping

Easy 5–10 minutes

1. Ensure the main gas shut-off valve is fully open
2. Check if stovetop burners ignite to confirm gas present
3. If stovetop also fails, contact gas supplier

⚠️ Safety First: If you smell gas, shut off immediately and ventilate area

Next step

Choose the next step for not heating

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Hot Surface Igniter

Heats until it can ignite gas released by the burner valve in ovens and gas dryers.

Typical part-only price

$20 - $65

DIY difficulty

Medium

Estimated time

20-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Gas Valve

Controls the flow of natural gas or propane to the burner jets.

$60 - $140 · Hard · 45-60 mins

Check fit & price

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Model number required

Model-compatible Gas Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Replace oven safety valve

Estimated Cost: $100–$250

Control board replacement

Estimated Cost: $200–$400

Repair or replace wiring harness

Estimated Cost: $50–$150

When to Call a Professional

If you smell gas at any time

If internal gas components need replacement

If multimeter diagnostics or igniter replacement is beyond comfort level

Preventive Maintenance

• Clean oven igniter and burner areas: Ignition failure due to buildup
  Frequency: every 3–6 months
• Annual professional inspection: Gas component and valve failures
  Frequency: annually

Frequently Asked Questions

Why is my Magic Chef Gas Oven not heating?

Common causes include a faulty igniter, closed gas supply, or a bad safety valve.

How do I fix Magic Chef Gas Oven not heating myself?

Inspect the igniter for damage, and ensure the gas supply is fully open.

How much does it cost to fix not heating?

Professional repairs range from $100 to $400 depending on the issue.

When should I call a technician for not heating?

If DIY solutions don't work or if you're unsure about the repairs needed.

Common Issues Reported by Users

• No gas flow to oven (1 mentions)
• Wiring issues (e.g., chewed by rats) (1 mentions)
• Faulty igniter (1 mentions)

User Suggested Solutions

1. Check the pilot light and gas flow

Community Discussions

no gas going to oven

Check the pilot light and gas flow; if no gas flows, the oven may be broken.

DIY View on Reddit →

unable to find conversion kit

User found a link to a conversion kit for LP conversion.

DIY View on Reddit →

oven does not work

Replace the igniter as it may not be strong enough to ignite the gas.

DIY View on Reddit →

Source: Reddit r/appliancerepair