LG Washer Dryer: error code
What is this symptom?
Experiencing an error code on your LG washer dryer? This indicates that the appliance has detected an issue, which can stem from common problems like water supply issues, drainage problems, or unbalanced loads. Understanding these error codes is the first step toward effective troubleshooting and restoring your appliance's functionality.
Important Tips for LG Models
- Error codes IE, OE, UE, FE, PE, LE, dE are standard across many LG washer/dryer combo and standalone models and have consistent meanings.
Possible Causes
Water supply issues
How to Identify: IE or similar water inlet codes appear; no adequate water fill detected within expected time.
Part: Inlet valve, inlet hose, water supply
Drainage or drain pump problems
How to Identify: OE code on washer indicates drainage issue; water remains in tub. Check for kinks or clogs.
Part: Drain hose, drain pump, filter
Unbalanced load in drum
How to Identify: UE or UB codes appear when load is uneven, causing vibration or spin issues.
Part: Drum load distribution
Door lock or latch error
How to Identify: dE, dE1 or related codes indicate door not properly closed/locked.
Part: Door lock assembly/switch
Motor or internal sensor fault
How to Identify: LE codes suggest motor locked or malfunction; drum won’t spin.
Part: Motor, hall sensor, motor control
Water level or pressure sensor error
How to Identify: PE or related codes indicate incorrect water level readings.
Part: Pressure (water level) sensor
Overfilling or water overflow
How to Identify: FE codes indicate water overfilling beyond safe limit.
Part: Inlet valve, level control
Dryer airflow or ventilation issues (dryer-specific)
How to Identify: D80, D90, D95 codes on dryer indicate airflow blockage.
Part: Dryer vent, lint filter, exhaust hose
Dryer heating or sensor errors (dryer-specific)
How to Identify: HE or TE codes on dryer suggest heating element or temperature sensor problems.
Part: Heating element, thermistor
DIY Solutions
Check and clean water inlet hoses/filters
- Turn off water supply and unplug the machine.
- Disconnect inlet hoses and inspect filters.
- Clean filters and check hose for kinks or blockages.
- Reconnect hoses, open valves fully, and restart machine.
Clear drain hose and pump filter
- Unplug machine and locate drain pump filter (often behind a lower front panel).
- Place a bucket under drain filter door, open and remove debris.
- Inspect and straighten the drain hose from kinks.
- Restart machine to see if OE code clears.
Redistribute laundry for balance errors
- Pause machine and open door.
- Evenly distribute laundry items in the drum.
- Avoid overloading or mixing too few items.
- Close door and restart cycle.
Ensure door is fully closed and clean latch
- Open and firmly close door ensuring no items obstruct seal.
- Clean latch area and contacts.
- Restart machine to clear dE errors.
Clean dryer lint filter and check venting (dryer airflow codes)
- Remove lint filter and clean thoroughly.
- Inspect vent hose and exhaust vent for lint buildup.
- Straighten any kinks and ensure exterior vent is clear.
- Run a dryer cycle to see if airflow codes persist.
Next step
Choose the next step for error code
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace faulty inlet valve or pressure sensor
Replace motor or door lock assembly
Professional dryer heating component repair
Drain pump replacement
When to Call a Professional
Preventive Maintenance
-
Clean drain pump filter and hoses: Drainage-related error codes
Frequency: monthly -
Clean lint filter and dryer vents: Airflow and overheating errors
Frequency: after every load -
Level washer dryer: Unbalanced load codes
Frequency: installation and periodic check
Frequently Asked Questions
Why is my LG Washer Dryer error code?
How do I fix LG Washer Dryer error code myself?
How much does it cost to fix error code?
When should I call a technician for error code?
References & Sources
- LG Washer Error Code List Official
- LG Washing Machine Error Codes Explained Community
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Faulty vibration sensor
- Unbalanced load in the drum
- Worn out suspension rods or shock absorbers
User Suggested Solutions
-
Inspect and replace the faulty vibration sensor. Disconnect the power, remove the back panel, locate the sensor, and replace it with a new one.
-
Redistribute the load in the drum. Open the washer door, rearrange the clothes to ensure an even distribution, and run a spin cycle.
-
Check and replace worn suspension rods or shock absorbers. Disconnect the power, remove the front panel, inspect the components, and replace as necessary.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
VS error code
Replaced faulty vibration sensor to resolve VS error code.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!