Lg Washer Dryer: broken cover

Professional Repair Guide

What is this symptom?

Is your LG Washer Dryer suffering from a broken cover? This issue often involves visible cracks or damage to panels like the door cover or rear housing, potentially exposing internal components and affecting functionality. It's important to address this damage to maintain safe operation and prevent further issues.

Urgency: Medium

Important Tips for Lg Models

  • LG acknowledges that fine mold lines or marks in plastic parts (including around doors) can appear during manufacturing and are not defects. (

Possible Causes

Physical damage from impact or misuse

How to Identify: Visible cracks, broken mounting tabs, or missing pieces on the cover or door frame.

Part: Exterior cover panel or door assembly

Normal manufacturing mold lines mistaken for cracks

How to Identify: Fine lines in plastic that are part of manufacturing rather than stress cracks.

Part: Plastic interior trim

DIY Solutions

Replace broken cover panel

Moderate 30-90 minutes
Tools Needed: screwdriver, protective gloves
  1. Disconnect power supply (unplug unit).
  2. Locate and remove screws/clips securing the damaged cover panel.
  3. Carefully detach the broken panel, watching for sharp edges.
  4. Install the replacement OEM panel (e.g., LG rear housing panel) aligning tabs and screw holes.
  5. Secure with original screws and check fit.
⚠️ Safety First: Wear gloves to avoid cuts from sharp edges

Temporarily reinforce cracked plastic cover

Easy 15-30 minutes
Tools Needed: duct tape or plastic reinforcing tape
  1. Ensure the machine is off and unplugged.
  2. Clean surface around the crack.
  3. Apply reinforcing tape over the crack on both sides of the panel to reduce sharp edges and slow spread of damage.
  4. Check regularly to determine when replacement is needed.
⚠️ Safety First: This is a temporary measure; not a long-term fix

Professional Repairs

Professional panel or door assembly replacement

Estimated Cost: $50 - $200+

When to Call a Professional

If the broken cover exposes internal wiring, components, or sharp edges requiring safe restoration
If the door assembly is damaged to the point the washer dryer will not seal, lock, or operate properly

Preventive Maintenance

  • Avoid slamming or impacting the machine covers/doors: Physical damage to covers and doors
    Frequency: continuous

Frequently Asked Questions

Why is my LG Washer Dryer broken cover?
Common causes include physical damage from impact or misuse and misinterpretation of normal manufacturing mold lines.
How do I fix LG Washer Dryer broken cover myself?
You can replace the broken cover panel or reinforce cracks using tape for a temporary fix.
How much does it cost to fix broken cover?
Professional repairs for a panel or door assembly can cost between $50 and $200 or more.
When should I call a technician for broken cover?
Consider calling a technician if the damage is extensive or if you're uncomfortable with DIY repairs.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

80%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Physical damage due to impact or mishandling
  • Wear and tear from prolonged use
  • Defective manufacturing leading to brittle plastic

User Suggested Solutions

  1. Inspect the broken cover for any sharp edges. Remove any remaining pieces of the old cover. Purchase a replacement cover specific to your LG Washer Dryer model. Follow the manufacturer's instructions to install the new cover, ensuring it is securely fastened.

  2. If the cover is not available, consider using a heat-resistant adhesive tape to temporarily secure the area until a replacement can be obtained. Ensure the area is clean and dry before applying the tape.

  3. Contact LG customer service for guidance on obtaining a replacement part or to inquire about warranty options if the damage is due to a manufacturing defect.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. LG washer dryer front glass

Community Discussions

black plastic cover broken

The black plastic cover serves as a heat shield and should ideally be in place.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!