LG Oven: not displaying hot surface warning
What is this symptom?
If your LG oven (range/cooktop) isn't displaying the hot surface warning light, you may be concerned about safety. This indicator, which alerts users when the cooktop surface is hot, may fail to illuminate during operation, leading to potential hazards. Common causes include issues with the temperature sensor, control electronics, or internal wiring, all of which should be addressed promptly.
Possible Causes
Indicator logic tied to surface temperature sensor
How to Identify: Surface gets hot but no indicator; when surface cools normally and no light ever appears.
Part: Hot surface sensor / logic circuit
Control/display electronics fault
How to Identify: Other display segments or functions behave irregularly (dim/partial displays or entire UI unresponsive.
Part: Display board / control board
Internal wiring/connection issue for the indicator
How to Identify: Intermittent or complete loss of indicator despite surfaces heating properly.
Part: Wiring harness / connector
Next step
Choose the next step for not displaying hot surface warning
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Preventive Maintenance
-
Keep control panel and sensors clean: False or missing indicator signals due to dirt or residue.
Frequency: monthly
Frequently Asked Questions
Why is my LG Oven (Range / Cooktop) Not displaying hot surface warning?
How do I fix LG Oven (Range / Cooktop) Not displaying hot surface warning myself?
How much does it cost to fix Not displaying hot surface warning?
When should I call a technician for Not displaying hot surface warning?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Faulty hot surface indicator light bulb
- Defective surface element or burner
- Malfunctioning control board or wiring issue
User Suggested Solutions
-
Check and replace the hot surface indicator light bulb if burnt out. Ensure the oven is unplugged before proceeding. Locate the bulb cover, remove it, and replace the bulb with a new one. Reassemble and test.
-
Test the surface element for continuity using a multimeter. If it shows no continuity, replace the surface element. Disconnect power, remove the element, and install a new one.
-
Inspect the control board and wiring for any visible damage or loose connections. If issues are found, repair or replace the control board as necessary. This may require professional help if you're not experienced.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!