LG Oven: light turning on unexpectedly

Professional Repair Guide

What is this symptom?

If your LG oven's light turns on unexpectedly, even when the oven is off and the door is closed, it's likely due to a faulty light switch, door switch, or control board issue. This common problem can be frustrating, but with the right troubleshooting steps, you can identify the cause and explore solutions.

Urgency: Medium

Important Tips for LG Models

  • LG ranges/ovens can exhibit control board and switch-related light issues; similar diagnostics apply across models.

Possible Causes

Faulty light switch or light button/touchpad

How to Identify: Light stays on regardless of pressing the light button; the control panel button may feel stuck or unresponsive.

Part: Oven light switch / touchpad control panel

Malfunctioning door switch

How to Identify: Light turns on as if the door were open even when closed; clicking when closing the door may be absent.

Part: Door switch sensor

Control board fault or short

How to Identify: All controls behave erratically; light won’t turn off even with button and door switch checks; other functions may misbehave.

Part: Main control board / oven control board

Loose/wiring short in light circuit

How to Identify: Intermittent unexpected light activation and possibly flickering; visible wiring damage when accessing interior wiring.

Part: Light wiring and socket

DIY Solutions

Test and replace the oven light switch/touchpad

Moderate 30–60 minutes
Tools Needed: multimeter, screwdriver set
  1. Disconnect power at circuit breaker.
  2. Access the control panel and locate the oven light switch or touchpad.
  3. Use a multimeter to test continuity — if switch shows continuity when ‘off’, replace it.
  4. Install replacement switch/touchpad, reassemble and restore power.
⚠️ Safety First: Cut power before accessing internal components.

Test door switch and replace if faulty

Moderate 30–60 minutes
Tools Needed: multimeter, screwdriver set
  1. Power off the oven at breaker.
  2. Locate and access the door switch (inside frame near hinge).
  3. With door closed, test continuity to ensure switch opens/closes properly.
  4. Replace switch if readings are incorrect.
  5. Reassemble and power on to test light behavior.
⚠️ Safety First: Ensure the oven is unplugged.

Next step

Choose the next step for light turning on unexpectedly

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price
Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply
Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace oven control board

Estimated Cost: $150 - $400

Inspect and repair internal wiring

Estimated Cost: $100 - $300

When to Call a Professional

Light stays on even after replacing switch or door switch
Other oven functions behave erratically alongside light issue
Internal wiring or control board access is needed

Preventive Maintenance

  • Periodically test door switch and control buttons: Unexpected light activations due to worn switches
    Frequency: annually
  • Clean control panel and buttons: Sticky or unresponsive buttons that may falsely register inputs
    Frequency: every 3–6 months

Frequently Asked Questions

Why is my LG Oven light turning on unexpectedly?
Common causes include a faulty light switch, malfunctioning door switch, or control board issues.
How do I fix LG Oven light turning on unexpectedly myself?
Turn off the power, then test and replace the light switch or door switch if faulty.
How much does it cost to fix light turning on unexpectedly?
Professional repairs range from $150 to $400 for control board replacement.
When should I call a technician for light turning on unexpectedly?
If DIY solutions are too complex or if issues persist after basic troubleshooting.

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Faulty door switch that is not properly detecting when the oven door is closed.
  • Malfunctioning control board sending signals to turn the light on.
  • Wiring issues or shorts in the electrical system causing random light activation.

User Suggested Solutions

  1. Inspect and replace the door switch: 1) Unplug the oven. 2) Remove the inner door panel to access the door switch. 3) Test the switch with a multimeter for continuity. 4) Replace if faulty. 5) Reassemble and test the oven.

  2. Reset the control board: 1) Unplug the oven for 10 minutes. 2) Plug it back in. 3) Check if the light issue persists. If it does, consider replacing the control board.

  3. Check wiring for shorts: 1) Unplug the oven. 2) Inspect wiring connections for damage or wear. 3) Repair or replace any damaged wires. 4) Reassemble and test the oven.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. I noticed when my dogs tail hits the new LG oven door twice,...

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318