KitchenAid Washing Machine: not draining
What is this symptom?
Is your KitchenAid washing machine not draining? This issue can cause water to remain in the drum after washing, leading to foul odors and potential mold growth. Common causes include a clogged drain pump or hose, or a malfunctioning water level sensor. Understanding these issues can help you troubleshoot effectively.
Possible Causes
Clogged drain pump or pump inlet
How to Identify: Water remains in drum after cycle; debris visible in pump filter; loud humming without water exit
Part: Drain Pump / Pump Filter
Kinked or blocked drain hose
How to Identify: Hose bent, crushed, or obstructed; water does not flow through hose when inspected
Part: Drain Hose
Drain pump motor failure
How to Identify: Pump does not run when expected, no humming or any sound, electrical test shows no voltage at pump
Part: Drain Pump Motor
Water level sensing/fail-safe error
How to Identify: Machine stops before draining or shows error codes without pump running; sensor tests reveal faults
Part: Water Level Sensor / Pressure Switch
Next step
Choose the next step for not draining
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Preventive Maintenance
-
Clean drain pump filter: Clogs leading to no drain
Frequency: monthly -
Inspect drain hose for kinks: Hose obstruction and flow restriction
Frequency: quarterly
Frequently Asked Questions
Why is my KitchenAid Washing Machine not draining?
How do I fix KitchenAid Washing Machine not draining myself?
How much does it cost to fix not draining?
When should I call a technician for not draining?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Clogged drain line (1 mentions)
- Faulty lid switch (1 mentions)
User Suggested Solutions
-
Use a shop vac, small pump, or siphon to remove water from the tub.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
Washing machine spins, but does not drain
Use a shop vac, small pump, or siphon to remove water from the tub.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!