KitchenAid Oven: not lighting

Possible Causes

Faulty or weak oven igniter

How to Identify: No flame appears, delayed ignition, or clicking/sparking without successful ignition. The igniter may glow weakly or not at all on gas models.

Part: Oven igniter (gas ignition assembly)

Gas supply not reaching the oven

How to Identify: No flame at all; may occur after installation or disconnection due to trapped air in gas line; gas valve could be partially closed.

Part: Gas valve and supply line

DIY Solutions

Clean the igniter and burner area

Moderate 15-30 minutes

Tools Needed: soft brush, screwdriver (if needed to access area)

1. Turn off oven and disconnect power/gas supply.
2. Open oven and locate the igniter assembly and burner ports.
3. Use a soft brush to remove any debris or buildup around the igniter and burner.
4. Reassemble and reconnect power and gas, then test ignition.

⚠️ Safety First: Turn off gas and power before starting.

Verify and release trapped air in gas line

Easy 5-10 minutes

1. Turn off oven controls and ensure all surface burners are off.
2. Turn on a surface burner briefly to help release any air trapped in the gas line.
3. Attempt to ignite the oven burner after air is released.

⚠️ Safety First: Ensure area is well ventilated.

Next step

Choose the next step for not lighting

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Hot Surface Igniter

Heats until it can ignite gas released by the burner valve in ovens and gas dryers.

Typical part-only price

$20 - $65

DIY difficulty

Medium

Estimated time

20-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Gas Valve

Controls the flow of natural gas or propane to the burner jets.

$60 - $140 · Hard · 45-60 mins

Check fit & price

Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply

Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Oven igniter replacement

Estimated Cost: $80 - $200

Gas valve or pressure regulator inspection/replacement

Estimated Cost: $150 - $350

Electrical ignition system diagnosis (spark module/wiring)

Estimated Cost: $120 - $300

When to Call a Professional

If you detect a gas smell when attempting ignition.

If cleaning the igniter does not resolve the issue.

If igniter shows no glow and needs replacement.

If electrical testing (spark module/wiring) is required.

Preventive Maintenance

• Clean igniter and burner ports: Prevent ignition failure due to debris buildup
  Frequency: monthly
• Check gas valve position: Ensures gas supply is available for ignition
  Frequency: every use

Frequently Asked Questions

Why is my KitchenAid Oven not lighting?

Common causes are a faulty or weak oven igniter and gas supply not reaching the oven.

How do I fix KitchenAid Oven not lighting myself?

You can clean the igniter and burner area or release trapped air in the gas line.

How much does it cost to fix not lighting?

Professional repairs range from $80 to $350 depending on the issue.

When should I call a technician for not lighting?

Consider calling a technician if DIY solutions fail or if you're unsure about the repairs.

References & Sources

• Oven Not Working - Gas and Dual Fuel Range - KitchenAid Official
• KitchenAid Repair Guide: Oven Not Working or Lighting Official

Common Issues Reported by Users

• Faulty control board (2 mentions)
• Faulty igniter (1 mentions)

User Suggested Solutions

1. Test for 120 vac to determine if sockets are faulty or if the control board is the issue.

Community Discussions

Oven lights not working

Test for 120 vac to determine if sockets are faulty or if the control board is the issue.

DIY View on Reddit →

Source: Reddit r/appliancerepair