Kenmore Gas Oven: not turning off

Possible Causes

Defective electronic control board

How to Identify: Oven stays on even after controls are off; control panel unresponsive or erratic; may also affect other functions.

Part: Electronic control board / relay board

Shorted heating elements causing continuous current

How to Identify: Visible damage to element (holes/blisters or electrical continuity where there shouldn’t be; continuous heating indicates possible short.

Part: Bake or broil heating element

DIY Solutions

Power-reset to test control board/touchpad

Moderate 15-30 minutes

Tools Needed: Screwdriver

1. Turn off power at breaker or unplug oven.
2. Let oven fully discharge and cool.
3. Access and disconnect control panel ribbon from control board.
4. Restore power and test oven off behavior to isolate touchpad vs board.
5. Reassemble once test is complete.

⚠️ Safety First: Always cut power before opening control panel.

Next step

Choose the next step for not turning off

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price

$120 - $280

DIY difficulty

Medium

Estimated time

20-40 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Heating Element

Heats the water or air inside the appliance to the required temperature.

$40 - $95 · Medium · 30-45 mins

Check fit & price

Model number required

Model-compatible Gas Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Electronic control board replacement

Estimated Cost: $150 - $400+

Control thermostat or touchpad replacement

Estimated Cost: $50 - $200

When to Call a Professional

If the oven continues heating with controls off and you suspect gas control or electronic board fault

If you are not comfortable disconnecting internal components

Preventive Maintenance

• Regularly inspect and clean control panel and touchpad to avoid dirt causing malfunctions: Erratic control inputs that may contribute to improper control signals
  Frequency: annually

Frequently Asked Questions

Why is my Kenmore Gas Oven not turning off?

The most common causes are a defective electronic control board or a shorted heating element.

How do I fix Kenmore Gas Oven not turning off myself?

Try a power reset by turning off the breaker or unplugging the oven, then disconnect the control panel ribbon.

How much does it cost to fix not turning off?

Professional repair costs range from $150 to $400+ for control board replacement.

When should I call a technician for not turning off?

Call a technician immediately if the oven continues to heat, as this poses safety risks.

User Suggested Solutions