Gorenje Dryer: excessive noise

Professional Repair Guide

What is this symptom?

Is your Gorenje dryer making excessive noise during operation? Loud sounds such as grinding, squealing, or rattling indicate potential issues like worn drum rollers, loose objects, or damaged bearings. Addressing these problems promptly can prevent further damage and ensure efficient drying.

Urgency: Medium

Important Tips for Gorenje Models

  • Common Gorenje-specific noisy dryer troubleshooting points include worn drum rear bearings and seized drum support rollers as typical mechanical causes.

Possible Causes

Worn or damaged drum support rollers

How to Identify: High-pitched squeaking or squealing that correlates with drum rotation; noise often changes with drum spin speed.

Part: Drum support rollers

Worn drum bearing or rear bearing assembly

How to Identify: Grinding or rumbling metal-on-metal noise from drum area; drum may scrape against housing.

Part: Drum bearing / rear bearing

Faulty idler pulley

How to Identify: High-pitched squealing or chirping at start and during rotation; belt tension issues may be noticed.

Part: Idler pulley assembly

Loose foreign objects in drum

How to Identify: Rattling or clanking sounds; noise varies with load and may stop when empty.

Part: Drum interior

Drive belt wear or damage

How to Identify: Thumping, slapping, or rumbling noises especially during spin; visible fraying or cracks during inspection.

Part: Drive belt

DIY Solutions

Remove foreign objects from drum

Easy 5-10 minutes
  1. Unplug the dryer.
  2. Open the dryer door and inspect interior drum for coins, buttons, or other loose items.
  3. Remove any objects found.
  4. Run a brief empty cycle to confirm noise resolution.
⚠️ Safety First: Always unplug dryer before inspection.

Check and adjust dryer leveling

Easy 10 minutes
Tools Needed: Carpenter’s level, Adjustable wrench
  1. Unplug the dryer.
  2. Use a level on top of the dryer front-to-back and side-to-side.
  3. Adjust leveling legs until the dryer is stable and level.
  4. Test dryer operation for noise.

Inspect and replace drum rollers

Moderate 60-90 minutes
Tools Needed: Screwdrivers, Nut driver set, Replacement rollers
  1. Unplug the dryer.
  2. Remove front and top panels to access drum rollers.
  3. Manually spin each roller and check for wear or stiffness.
  4. Replace worn rollers with new parts.
  5. Reassemble dryer and test.
⚠️ Safety First: Be cautious of sharp sheet metal edges.

Replace drum bearing / rear bearing

Advanced 90-120 minutes
Tools Needed: Screwdrivers, Socket set, Replacement bearing
  1. Unplug the dryer.
  2. Remove drum assembly to access rear bearing.
  3. Inspect rear bearing for wear and replace if necessary.
  4. Reassemble and test dryer operation.
⚠️ Safety First: Mechanical complexity is higher; consider professional help if unsure.

Professional Repairs

Blower wheel inspection and replacement

Estimated Cost: $100 - $200

When to Call a Professional

Noise persists after checking for loose items and basic adjustments
Grinding or metal-on-metal sounds indicating potential bearing or internal damage
Issues involving motor, electrical components, or gas connections

Preventive Maintenance

  • Regularly inspect and clean drum interior and lint traps: Noise from foreign objects and lint buildup
    Frequency: monthly
  • Level dryer and check support rollers: Excessive vibration and premature wear of mechanical components
    Frequency: annually

Frequently Asked Questions

Why is my Gorenje Dryer excessive noise?
Common causes include worn drum support rollers, a faulty idler pulley, or loose foreign objects in the drum.
How do I fix Gorenje Dryer excessive noise myself?
Start by removing foreign objects from the drum and checking the dryer leveling. Inspect drum rollers for wear.
How much does it cost to fix excessive noise?
Professional repair costs for blower wheel inspection and replacement range from $100 to $200.
When should I call a technician for excessive noise?
If DIY solutions don't resolve the noise or if complex repairs like drum bearing replacement are needed, contact a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Worn drum rollers or bearings causing friction and noise during operation.
  • Loose or damaged blower wheel leading to rattling or loud noises.
  • Foreign objects trapped in the drum or blower assembly creating disruptive sounds.

User Suggested Solutions

  1. Inspect and replace worn drum rollers or bearings. First, unplug the dryer. Remove the front panel and drum to access the rollers. Replace any worn parts and reassemble the dryer.

  2. Check and replace the blower wheel. Unplug the dryer, remove the front panel, and locate the blower assembly. Inspect the wheel for damage and replace if necessary.

  3. Clear any foreign objects from the drum or blower. Open the dryer door and inspect the drum for items. Check the blower assembly for blockages and remove any debris.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Loud Gorenje dryer

Community Discussions

loud noise

Blower replacement needed as per technician's diagnosis.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!