GE Washing Machine: inverter board failure

Professional Repair Guide

What is this symptom?

Experiencing issues with your GE washing machine? If the inverter board has failed, you may encounter error codes like E43, the washer might not start, or it could fail to spin or agitate properly. This can lead to erratic cycle behaviors and incomplete washes, indicating potential inverter control problems.

Urgency: High

Important Tips for GE Models

  • Error code E43 specifically indicates a defect detected in the inverter control board on GE washers.

Possible Causes

Voltage fluctuations / power surges

How to Identify: Symptoms occur after unstable power supply; visible burn marks or electronic component damage on board; persistent error codes such as E43. (albarouda.ae

Part: Inverter control board components (capacitors, circuits)

Moisture / corrosion damage

How to Identify: Corrosion/rust visible on board, moisture exposure near control area, intermittent error codes, erratic motor function.

Part: Inverter board contacts/circuitry

Aging electronic components / manufacturing defect

How to Identify: Failure without obvious external causes, components fail continuity testing with multimeter.

Part: Capacitors, resistors, motor drive electronics

DIY Solutions

Perform power cycle and control board reset

Easy 5–10 minutes
  1. Disconnect power by unplugging the washer.
  2. Wait ~1 minute to ensure capacitors discharge.
  3. Plug the washer back in and attempt a reset sequence per GE manual.
⚠️ Safety First: Ensure power is disconnected before interacting with machine.

Visual inspection for damage

Moderate 10–20 minutes
Tools Needed: Screwdriver, Flashlight
  1. Unplug the machine and remove access panel to the inverter board.
  2. Inspect board for burn marks, corrosion, or loose connectors.
  3. If connectors are loose, reseat them securely.
⚠️ Safety First: Disconnect power before opening any panels.

Next step

Choose the next step for inverter board failure

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply
Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply
Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Inverter board replacement

Estimated Cost: $100 - $250 (parts only)

Control board diagnostic and repair

Estimated Cost: $150 - $400 (including labor)

When to Call a Professional

Persistent error codes after reset and basic checks
Visible burn marks, smoke/overheating, or burnt smell
Motor won’t spin and inverter board replacement is indicated

Preventive Maintenance

  • Use a surge protector: Voltage-related electronic board damage
    Frequency: Always
  • Keep area dry: Moisture-induced corrosion of control electronics
    Frequency: Ongoing

Frequently Asked Questions

Why is my GE Washing Machine inverter board failure?
Common causes include voltage fluctuations, moisture damage, and aging components.
How do I fix GE Washing Machine inverter board failure myself?
Try a power cycle reset and inspect the inverter board for visible damage.
How much does it cost to fix inverter board failure?
Inverter board replacement costs between $100 - $250; diagnostics and repairs can be $150 - $400.
When should I call a technician for inverter board failure?
Call a technician if DIY solutions don't resolve the issue, given the high urgency of repair.

References & Sources

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Power surges damaging the inverter board
  • Overheating due to poor ventilation or blocked vents
  • Faulty wiring or connections leading to short circuits

User Suggested Solutions

  1. Inspect the power supply and use a surge protector. Ensure that the washing machine is plugged into a stable outlet and consider using a surge protector to prevent future damage.

  2. Check for proper ventilation. Ensure that the washing machine is placed in an area with adequate airflow and that vents are not blocked. Clean any debris around the machine.

  3. Inspect wiring connections. Unplug the machine and check all wiring and connectors for damage or loose connections. Repair or replace as necessary.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. GE washer keeps breaking inverter boards

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318