GE Washer Dryer: not turning on

Possible Causes

Power supply issue (outlet/breaker/cord)

How to Identify: No lights, no sounds at all; other devices not powering from same outlet; tripped breaker.

Part: Power cord, electrical outlet, circuit breaker

Electronic control board glitch or failure

How to Identify: No display response, no start after reset; power cycling for >5 min doesn’t restore functionality.

Part: Electronic control board

Door latch/safety interlock fault

How to Identify: Unit shows no signs of power or start if door isn’t fully latched or if latch sensor fails.

Part: Door latch/switch

Internal electrical/component failure (e.g., power board, fuse)

How to Identify: Burnt smell, visible damage, or after electrical surge; still no power after basic checks.

Part: Internal fuse, power module

DIY Solutions

Power reset and outlet check

Easy 10 minutes

Tools Needed: none

1. Unplug the washer dryer combo from its outlet.
2. Wait at least 5 minutes to allow internal control boards to reset.
3. While unplugged, verify the outlet has power using another device or a voltage tester.
4. Plug the unit back in firmly and attempt to power on.

⚠️ Safety First: Ensure hands are dry and outlet is in good condition.

Check breaker and power cord

Easy 5 minutes

Tools Needed: none

1. Locate your home’s electrical panel and check if the breaker for the laundry circuit has tripped; reset if needed.
2. Visually inspect the washer dryer’s power cord for damage or burn marks.
3. Ensure the unit is plugged directly into a wall outlet rather than an extension lead.

⚠️ Safety First: Turn off breaker before touching wiring if present.

Next step

Choose the next step for not turning on

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Power Cord

Supplies mains power to the appliance and includes the model-specific plug and terminal connection.

Typical part-only price

$15 - $70

DIY difficulty

Medium

Estimated time

20-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Possible related component

Door Latch Assembly

Mechanically secures the appliance door and may operate a door-closed safety switch.

$15 - $80 · Medium · 20-60 mins

Check fit & price

Possible related component

Thermal Fuse

A safety device that cuts off power to the appliance if it starts to overheat.

$10 - $20 · Easy · 10-20 mins

Check fit & price

Model number required

Model-compatible Washer Dryer parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dryer Vent Cleaning Kit

Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.

View maintenance supply

Maintenance supply

Lint Trap Cleaning Brush

A narrow brush for routine cleaning around an accessible lint screen and housing.

View maintenance supply

Maintenance supply

Dryer Vent Hose Kit

A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Control board replacement

Estimated Cost: $150 - $350

Internal power supply/fuse fix

Estimated Cost: $100 - $250

When to Call a Professional

After eliminating simple power issues and reset attempts with no improvement

If there are signs of internal electrical damage (burn smell, smoke, visible burnt components)

If door latch/switch diagnostics and internal checks are beyond your comfort/skill

Preventive Maintenance

• Periodic outlet and cord inspection: Loose connections and degraded cords potentially causing no‑power issues
  Frequency: monthly
• Avoid power surges: Control board damage and electrical component failure
  Frequency: as needed

Frequently Asked Questions

Why is my GE Washer Dryer not turning on?

Common causes include power supply issues, control board failure, or door latch faults.

How do I fix GE Washer Dryer not turning on myself?

Try a power reset, check the outlet, breaker, and inspect the power cord for damage.

How much does it cost to fix not turning on?

Professional repairs can range from $100 to $350 depending on the issue.

When should I call a technician for not turning on?

If DIY solutions don't resolve the issue or if you're uncomfortable troubleshooting further.

References & Sources

• GE Profile™ UltraFast Combo Washer/Dryer - Will Not Start or Run Official

User Suggested Solutions

1. Replaced the control board

Community Discussions

washer won't turn on (no lights)

Replaced the control board, which fixed the issue.

DIY View on Reddit →

Source: Reddit r/appliancerepair