GE Washer Dryer: noisy spin cycle, grinding noise, loud hum, clicking noise
What is this symptom?
If your GE Washer Dryer is producing a noisy spin cycle with grinding, loud humming, or clicking noises, it may indicate underlying issues like worn tub bearings or an unbalanced load. Addressing these problems promptly can prevent further damage and ensure smoother operation.
Important Tips for GE Models
- Normal metallic clicking can occur during spin transition due to mode shifter; not indicative of failure.
Possible Causes
Worn tub bearings
How to Identify: Grinding or rumbling noise that persists throughout spin; may hear loud scrape sound and possible water leak at bottom
Part: Tub bearing
Unbalanced or overloaded load
How to Identify: Thumping and vibration noise that improves after redistributing clothes; uneven drum movement
Part: Load distribution
Damaged drive belt or pulley
How to Identify: Squealing or flapping noises, rhythmic noise correlated with drum speed; visible wear on belt
Part: Drive belt/pulley
Failed motor coupling
How to Identify: Vibrating sound with irregular drum speed; washer may stop spinning entirely when coupling failed
Part: Motor coupling
Weak or worn shock absorbers/suspension
How to Identify: Banging or thumping sound accompanied by excessive machine movement during spin
Part: Shock absorbers/suspension rods
Normal clicking from mode shifter (not a fault)
How to Identify: Clicking at cycle transition from agitation to spin typical; not loud or persistent throughout spin
Part: Mode shifter/drive system
DIY Solutions
Redistribute laundry and reduce load
- Pause cycle and open washer door
- Evenly spread clothes around drum to balance load
- Restart spin cycle
Inspect for foreign objects in drum
- Unplug machine
- Check inside drum and around door seals for coins/small objects
- Remove any found debris
Next step
Choose the next step for noisy spin cycle, grinding noise, loud hum, clicking noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drum Bearing Kit
Supports the spinning drum and ensures smooth, quiet rotation during cycles.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Hard
- Estimated time
- 120-180 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
Washer Motor Coupling
Transfers motor power to the washer transmission on models that use a direct-drive coupling.
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace tub bearings and seals
Replace drive belt/pulley/motor coupling
Replace shock absorbers/suspension
When to Call a Professional
Preventive Maintenance
-
Ensure loads are balanced and within capacity: Unbalanced spin noise and stress on components
Frequency: Every use -
Check for coins and debris before loading: Rattling noises and potential drum damage
Frequency: Every use
Frequently Asked Questions
Why is my GE Washer Dryer noisy spin cycle, grinding noise, loud hum, clicking noise?
How do I fix GE Washer Dryer noisy spin cycle, grinding noise, loud hum, clicking noise myself?
How much does it cost to fix noisy spin cycle, grinding noise, loud hum, clicking noise?
When should I call a technician for noisy spin cycle, grinding noise, loud hum, clicking noise?
References & Sources
- GE Washer Knocking and Normal Noises Official
- GE Washer Loud When Spinning Troubleshooting Community
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged drive belt causing slippage and noise
- Faulty drum bearings leading to grinding and loud noises
- Obstructed or damaged drain pump resulting in loud hum and clicking sounds
User Suggested Solutions
-
Inspect and replace the drive belt. Unplug the washer, remove the front panel, and check the belt for wear or damage. If damaged, replace it with a new belt.
-
Check and replace drum bearings. This involves removing the drum from the washer. Inspect the bearings for wear and replace them if necessary.
-
Examine the drain pump for obstructions or damage. Remove the pump, clean out any debris, and test for proper operation. Replace if necessary.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!