GE Dehumidifier: not making water

Professional Repair Guide

What is this symptom?

Is your GE dehumidifier not making water? This issue often occurs when the unit is on but fails to collect moisture, even in high humidity conditions. Common causes include low ambient humidity levels or a malfunctioning float switch. Understanding these factors can help you troubleshoot the issue effectively.

Urgency: Medium

Possible Causes

Ambient conditions (low humidity or low temperature) reducing condensation

How to Identify: Measured relative humidity below ~45–50% or ambient temperature below ~60–65°F where units struggle to condense moisture

Part: Environmental conditions

Float switch or full bucket sensor engaged or stuck

How to Identify: Unit stops collecting despite bucket empty; float appears stuck or misaligned

Part: Float switch / bucket sensor

Next step

Choose the next step for not making water

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Model number required

Browse by model — no specific failed part is claimed

Model-compatible Dehumidifier parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Preventive Maintenance

  • Clean air filter: Airflow restriction and reduced moisture collection
    Frequency: monthly
  • Check placement and environment: Inefficient operation due to temperature or humidity extremes
    Frequency: seasonally

Frequently Asked Questions

Why is my GE Dehumidifier not making water?
Common causes include low humidity or temperature, and a stuck float switch.
How do I fix GE Dehumidifier not making water myself?
No DIY solutions are available for this issue.
How much does it cost to fix not making water?
Professional repair costs can vary; consult a technician for an estimate.
When should I call a technician for not making water?
Call a technician if the issue persists despite troubleshooting ambient conditions.

References & Sources

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • The humidity level in the room is too low for the dehumidifier to extract water.
  • The dehumidifier's filter is dirty or clogged, restricting airflow.
  • The unit is not set to the correct humidity level or is malfunctioning.

User Suggested Solutions

  1. Check the humidity level in the room. If it's below the set level, consider lowering the setting or using the unit in a more humid environment.

  2. Inspect and clean the air filter. Remove it, wash it with mild soap and water, and let it dry completely before reinstalling.

  3. Check the dehumidifier settings to ensure it is set to an appropriate humidity level. If the settings appear correct but the unit is still not functioning, consider resetting the unit or consulting the manual for troubleshooting steps.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. GE dehumidifier not making water

User Comments (0)

Share your experience or solution below.

Be the first to comment!