Fisher & Paykel Gas Cooktop: not lighting
What is this symptom?
Experiencing issues with your Fisher & Paykel gas cooktop not lighting? This can manifest as no spark, persistent clicking, or needing to light manually. Common causes include gas supply issues or a faulty igniter. Follow our guide to troubleshoot and restore your cooktop to working order.
Important Tips for Fisher & Paykel Models
- Official troubleshooting specifically lists dirty/wet electrodes and incorrect burner part placement as causes when burners won’t light.
- Official guidance notes that if electrodes are not sparking, they may be dirty or wet and should be cleaned.
Possible Causes
Gas supply turned off or low gas flow
How to Identify: No gas sound when turning a burner on; none of the burners produce flame.
Part: Gas supply / shutoff valve
Faulty ignition switch or wiring to igniter
How to Identify: Igniter makes no spark for a given burner while others work; wires show damage or disconnection.
Part: Ignition switch / spark wires
DIY Solutions
Check and restore gas supply
- Ensure the gas shutoff valve behind the cooktop is fully open.
- Turn a burner knob to hear if gas is flowing (sound of gas).
Clean ignitor electrodes and burner components
- Turn off all burners and ensure cooktop is cool.
- Remove burner grate and cap, then use a soft brush with methylated spirits to clean around the ignitor tip and the burner ports.
- Allow all parts to fully dry before reassembling and testing.
Align burner cap correctly
- Ensure the cooktop is cool.
- Lift the burner cap and check it sits perfectly flat and centered on the burner base.
- Adjust alignment if necessary then test ignition.
Next step
Choose the next step for not lighting
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Control Knob
Fits the model-specific control shaft used to select temperature, burner level, or operating mode.
- Typical part-only price
- $8 - $45
- DIY difficulty
- Easy
- Estimated time
- 5-15 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Gas Burner Cap
Distributes flame evenly over a gas burner head and must match the burner size and model.
Model-compatible Gas Cooktop parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Professional Repairs
Replace faulty igniter or spark module
Inspect and repair ignition switch or wiring
When to Call a Professional
Preventive Maintenance
-
Clean burners and ignitors: Ignition failure due to dirt, food debris, and moisture
Frequency: monthly -
Check burner cap alignment: Ignition obstruction and misfiring
Frequency: each time after deep cleaning
Frequently Asked Questions
Why is my Fisher & Paykel Gas Cooktop not lighting?
How do I fix Fisher & Paykel Gas Cooktop not lighting myself?
How much does it cost to fix not lighting?
When should I call a technician for not lighting?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Clogged burner ports preventing gas flow
- Faulty igniter not producing a spark
- Gas supply issue (valve closed or low pressure)
User Suggested Solutions
-
Clean the burner ports with a soft brush or toothpick to remove any debris. Ensure the burner cap is properly seated after cleaning.
-
Test the igniter by turning on the cooktop and listening for a clicking sound. If no sound is heard, replace the igniter assembly.
-
Check the gas supply by ensuring the gas valve is open and inspecting the gas line for any kinks or leaks. If issues persist, contact your gas supplier.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Community Discussions
Two burners won't light, lighter keeps clicking
Check for food debris or blockage in the burners and the spark ignitor area.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!