None Dryer: takes too long to dry
What is this symptom?
If your dryer is running but clothes are still damp or taking too long to dry, it could be due to a clogged exhaust vent, a dirty lint filter, or even incorrect settings. Addressing these common issues can improve drying efficiency and prevent overheating.
Possible Causes
Clogged dryer exhaust vent
How to Identify: Long dry times, warm air not exiting vent properly, lint buildup visible at exterior vent, dryer feels hotter than usual
Part: Exhaust vent/duct
Clogged or dirty lint filter
How to Identify: Visible lint buildup on filter, reduced airflow, clothes still damp after full cycle
Part: Lint filter
Overloading dryer with too large or heavy loads
How to Identify: Drying times normal for smaller loads but extended when overloaded; uneven drying
Part: User operation/load size
Incorrect dryer settings (low heat or wrong cycle)
How to Identify: Using delicate or low-heat settings; dryer cycles appear complete but clothes still damp
Part: Control settings/program
Restricted or damaged vent hose
How to Identify: Kinks, bends, or physical damage in external vent hose; airflow visibly restricted
Part: Vent hose
Faulty moisture sensor
How to Identify: Dryer cycles longer than expected even with light loads; sensor not detecting dryness
Part: Moisture sensor bars
Heating element or thermostat issues
How to Identify: Dryer heats weakly or unevenly, extended dry times without proper heat
Part: Heating element/thermostat
DIY Solutions
Clean lint filter
- Locate lint filter (usually inside the door rim or top of drum)
- Remove lint by hand before every load
Clear dryer exhaust vent
- Unplug dryer and move away from wall
- Disconnect exhaust vent from dryer
- Use vacuum and brush kit to remove lint from duct and both ends
- Reconnect vent and test dryer
Reduce load size and sort fabrics
- Separate laundry into smaller loads
- Sort by fabric weight (e.g., heavy vs light)
- Run separate cycles
Check and reposition vent hose
- Pull dryer slightly from wall
- Inspect vent hose for kinks or bends
- Straighten or replace hose if damaged
Next step
Choose the next step for takes too long to dry
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Lint Filter
Captures lint from exhaust air before it reaches the dryer vent path.
- Typical part-only price
- $15 - $55
- DIY difficulty
- Easy
- Estimated time
- 5 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Dryer Moisture Sensor
Detects moisture in clothing so automatic drying cycles can stop at the selected dryness level.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Internal component replacement (heating element or thermostat)
Moisture sensor diagnosis and replacement
When to Call a Professional
Preventive Maintenance
-
Clean lint filter before every load: Airflow restriction and long dry times
Frequency: every load -
Clean exhaust vent annually: Vent clog buildup and inefficient drying
Frequency: annually -
Inspect vent hose for damage: Airflow restriction from kinks or damage
Frequency: semi-annually
Frequently Asked Questions
Why is my Any Dryer takes too long to dry?
How do I fix Any Dryer takes too long to dry myself?
How much does it cost to fix takes too long to dry?
When should I call a technician for takes too long to dry?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Lint buildup in the vent or lint trap
- Faulty heating element
- Overloading the dryer
User Suggested Solutions
-
Clean the lint trap and vent. Remove any lint buildup from the lint screen and use a vent cleaning brush to clear the duct.
-
Test the heating element for continuity using a multimeter. If faulty, replace the heating element.
-
Reduce the load size in the dryer. Ensure that the dryer is not overloaded to allow for proper air circulation.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
dryer takes long time to dry
Turn off energy saver to reduce drying time
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!