None Dryer: making noise

Professional Repair Guide

What is this symptom?

Is your dryer making unusual noises like rattling, squeaking, or grinding? These sounds can indicate mechanical issues, often arising from loose items, an unlevel dryer, or worn components. Addressing these problems early can prevent further damage and costly repairs.

Urgency: Medium

Possible Causes

Loose items inside drum

How to Identify: Rattling or clattering noise that changes with load; may stop when objects removed.

Part: Drum interior

Dryer not level

How to Identify: Banging or thumping noise with vibration; unit rocks if pushed gently.

Part: Legs/leveling assembly

Worn or damaged drum rollers/bearings

How to Identify: Squeaking, scraping or rumbling when drum spins; noise persists regardless of load.

Part: Drum rollers/bearings

Idler pulley or drive belt issues

How to Identify: Squeaking or squealing noise; belt slipping or frayed appearance.

Part: Idler pulley / drive belt

Blower wheel blockage or wear

How to Identify: Loud humming or buzzing; airflow issues with noise from back of unit.

Part: Blower wheel

Motor or internal mechanical wear

How to Identify: Low droning or whining, increased noise over time, possible performance issues.

Part: Motor / internal drive components

DIY Solutions

Remove loose items from drum

Easy 5-10 minutes
  1. Open the dryer door and inspect the drum thoroughly.
  2. Remove any loose objects (coins, buttons, pins, etc.).
  3. Run a short cycle to verify noise is resolved.
⚠️ Safety First: Ensure unit is stopped before reaching inside.

Level the dryer

Moderate 10-20 minutes
Tools Needed: level, wrench
  1. Place a level on top of the dryer to check its balance.
  2. Adjust the leveling feet by turning them until the unit is level.
  3. Tighten lock nuts and recheck leveling.
⚠️ Safety First: Disconnect power before adjusting heavy units.

Inspect and replace drum rollers/bearings

Advanced 1-2 hours
Tools Needed: screwdriver, socket set, replacement rollers
  1. Unplug dryer and remove access panels.
  2. Locate and inspect drum rollers/bearings for wear.
  3. Replace worn rollers/bearings and reassemble dryer.
⚠️ Safety First: Wear safety gloves; keep power disconnected.

Next step

Choose the next step for making noise

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drive Belt

Transfers rotational power from the motor to turn the drum or tub.

$15 - $35 · Easy · 20-30 mins

Check fit & price
Possible related component

Dryer Idler Pulley

Maintains tension on the dryer drum belt as the drum rotates.

$15 - $45 · Medium · 30-60 mins

Check fit & price
Possible related component

Dryer Blower Wheel

Moves heated air through the dryer drum and exhaust system.

$25 - $70 · Medium · 45-90 mins

Check fit & price
Model number required

Model-compatible Dryer parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dryer Vent Cleaning Kit

Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.

View maintenance supply
Maintenance supply

Lint Trap Cleaning Brush

A narrow brush for routine cleaning around an accessible lint screen and housing.

View maintenance supply
Maintenance supply

Dryer Vent Hose Kit

A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace idler pulley/drive belt

Estimated Cost: $50 - $150

Motor or blower wheel replacement

Estimated Cost: $150 - $400+

When to Call a Professional

Noise persists after basic DIY checks (loose items, leveling, lint removal).
Internal mechanical noise (grinding or metal-on-metal sounds) continues after inspection.
You are uncomfortable accessing internal components.

Preventive Maintenance

  • Clean lint filter and internal vents: Airflow restriction and noise from overworked motor.
    Frequency: after every use
  • Check dryer leveling: Vibration and noise due to uneven installation.
    Frequency: monthly

Frequently Asked Questions

Why is my Any Dryer making noise?
Common causes include loose items inside the drum, an unlevel dryer, or worn drum rollers and bearings.
How do I fix Any Dryer making noise myself?
To fix it, remove loose items, level the dryer, or inspect and replace worn drum rollers and bearings.
How much does it cost to fix making noise?
Professional repairs like replacing the idler pulley or motor can cost between $50 and $400+.
When should I call a technician for making noise?
Call a technician if the noise persists after DIY fixes or if you suspect motor or blower wheel issues.

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Can I Fix This Myself?

65%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Worn or damaged rollers (7 mentions)
  • Idler pulley issues (5 mentions)
  • Misaligned or damaged belt (4 mentions)
  • Foreign objects in the drum (2 mentions)

User Suggested Solutions

  1. Replace worn or damaged rollers

  2. Replace idler pulley

  3. Realign or replace the belt

  4. Remove foreign objects from the drum

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318