None Dryer: foreign object in dryer
What is this symptom?
Is your dryer making unexpected noises or rattling? This may indicate a foreign object, like a coin or hairpin, lodged in the drum or lint filter. Such blockages can disrupt airflow and cause further damage. Regular inspection and removal are crucial to maintaining your dryer's performance.
Important Tips for None Models
- Foreign objects caught in the drum front seal or lint filter opening can cause metal scraping noises; service may be recommended.
- Objects dropped into the drying path may reach internal areas and require disassembly/repair depending on size; small items may show up in drain filter.
- Items dropped into the dryer filter opening connect to the drum interior; extraction may require service and continuing use with the object inside can cause faults.
Possible Causes
Foreign object lodged in drum or between drum components
How to Identify: Rattling, scraping, or clunking noise during rotation; visible object in drum or near lint trap
Part: Drum interior, drum front seal, drum baffles
Object in blower housing or internal duct
How to Identify: Persistent noise after drum cleared; airflow reduction; technician-level inspection reveals obstruction
Part: Blower wheel / drying duct
DIY Solutions
Remove foreign objects from the drum or lint trap
- Unplug dryer from power.
- Open dryer door and inspect drum for visible objects; remove by hand or with gloves.
- Check lint filter opening and remove lint trap; use flashlight to look inside, remove any foreign object seen.
- Close lint trap and run a short cycle to verify noise or obstruction is resolved.
Inspect under drum lifters/baffles for hidden items
- Unplug dryer and remove front/top panel per model instructions.
- Rotate drum by hand and inspect under drum baffles for trapped objects.
- Remove any debris or object found.
- Reassemble panels and test dry cycle.
Next step
Choose the next step for foreign object in dryer
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Blower Wheel
Moves heated air through the dryer drum and exhaust system.
- Typical part-only price
- $25 - $70
- DIY difficulty
- Medium
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Internal foreign object removal and inspection
Cleaning or replacing damaged components
When to Call a Professional
Preventive Maintenance
-
Check and empty lint filter before every cycle: Foreign objects and lint buildup blocking airflow
Frequency: every use -
Inspect pockets before laundering: Coins, hairpins, and small items entering dryer
Frequency: every laundry load -
Periodic deep inspection under drum baffles: Hidden debris causing noise or obstruction
Frequency: annually
Frequently Asked Questions
Why is my Any Dryer foreign object in dryer?
How do I fix Any Dryer foreign object in dryer myself?
How much does it cost to fix foreign object in dryer?
When should I call a technician for foreign object in dryer?
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Foreign object (like candy) accidentally left in pockets before washing
- Items stuck in the lint trap or venting system
- Objects lodged within the dryer drum or between the drum and the housing
User Suggested Solutions
-
Inspect the dryer drum thoroughly for any visible foreign objects. Remove any items found. Check the lint trap and vent for blockages. Clean out any debris.
-
Run the dryer on a low heat setting with old cloths to absorb any residues from the candy. Check and clean the lint trap afterward.
-
If foreign objects are lodged within the dryer’s internal components, disassemble the dryer following the manufacturer's instructions and remove the items. Reassemble and test the dryer.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
chocolate candy in dryer
Clean the dryer drum and run it with old cloths to remove residues.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!