Breville Toaster Oven: broken heating element

Professional Repair Guide

What is this symptom?

Is your Breville Toaster Oven not heating up? A broken heating element could be the cause. Look for signs like a snapped or non-glowing element when powered on. This common issue may stem from a burned-out heating element, faulty electrical connections, or problems with the control board or thermostat. Understanding these causes can help you effectively address the heating issue.

Urgency: Medium

Important Tips for Breville Models

  • Breville BOV800XL and similar models use quartz heating elements; broken glass or element fragments have been reported in official Q&A forums.

Possible Causes

Burned‑out or physically broken heating element

How to Identify: Element shows a visible break, deformation, burnt spots, or fails a continuity test with a multimeter.

Part: Heating element (Nichrome coil)

Faulty electrical connections to the element

How to Identify: Loose, burnt or frayed wires at element terminals; intermittent heating; visible wiring damage inside chassis.

Part: Wiring harness to heating element

Control board or thermostat issue preventing power delivery

How to Identify: Neither top nor bottom element ever glows; oven doesn’t respond to heat settings; continuity tests on elements show OK.

Part: Control board / thermostat

DIY Solutions

Test heating element for continuity

Moderate 15-30 minutes
Tools Needed: multimeter, screwdriver
  1. Unplug the toaster oven and ensure it is fully disconnected from power.
  2. Remove the outer casing using appropriate screwdrivers.
  3. Locate the heating element terminals and use a multimeter to test for continuity.
  4. No continuity indicates a broken element needing replacement.
⚠️ Safety First: Always unplug before opening and testing.

Professional Repairs

Replace faulty heating element

Estimated Cost: $10 - $40

Replace control board or thermostat

Estimated Cost: $50 - $150+

When to Call a Professional

If you are uncomfortable disassembling the toaster oven or testing electrical components.
If visual inspection and multimeter testing do not clearly identify the broken part.
If wiring harness or control board repairs are required.

Preventive Maintenance

  • Keep heating elements clean and avoid spills: premature element wear and overheating
    Frequency: monthly

Frequently Asked Questions

Why is my Breville Toaster Oven broken heating element?
Common causes include a burned-out heating element, faulty connections, or control board issues.
How do I fix Breville Toaster Oven broken heating element myself?
Test the heating element for continuity using a multimeter after safely disassembling the oven.
How much does it cost to fix broken heating element?
Replacing a heating element costs $10 - $40; control board repairs range from $50 - $150+.
When should I call a technician for broken heating element?
Call a technician if DIY repairs seem complex or if the issue persists after troubleshooting.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

65%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Heating element has developed a break or crack due to wear and tear.
  • Electrical connection to the heating element is loose or corroded.
  • Thermostat malfunction causing improper heating regulation.

User Suggested Solutions

  1. Inspect the heating element for visible damage. If broken, replace it by unscrewing it from its mountings and connecting the new element securely.

  2. Check all electrical connections to the heating element. Tighten any loose wires and clean any corrosion found.

  3. Test the thermostat with a multimeter to ensure it is functioning properly. Replace it if it is faulty.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Broken Heating Element Dangerous?

Community Discussions

slightly broken heating element

User has been using it without issues.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!