Bosch Refrigerator: reminder to change water filter not resetting

Professional Repair Guide

What is this symptom?

If your Bosch refrigerator's water filter change reminder light won't reset after replacing the filter, you're not alone. This frustrating issue can stem from not manually resetting the indicator, improper filter installation, or even a glitch in the control panel. Follow our guide to troubleshoot and resolve this common problem.

Urgency: Low

Important Tips for Bosch Models

  • Bosch refrigerators typically require a manual reset of the water filter indicator after installing a new filter by holding the reset or light/filter button for 3–5 seconds. (Hello Portable

Possible Causes

Filter indicator not manually reset after filter replacement

How to Identify: Filter change reminder stays on even after installing a new water filter; no other errors present.

Part: Control Panel / Filter Reset Button

Incorrect installation or seating of the new water filter

How to Identify: Filter feels loose or doesn’t lock in place; persistent indicator despite reset attempt.

Part: Water Filter and Housing

Control panel glitch or software hiccup

How to Identify: Reset button doesn’t respond; control panel unresponsive or glitchy.

Part: Electronic Control Panel

DIY Solutions

Filter Change and Manual Reset

Easy 5 minutes
  1. Ensure the water filter has been properly replaced.
  2. Locate the filter reset or light/filter button on the control panel.
  3. Press and hold the button for about 3–5 seconds until the indicator turns off.
  4. Verify the indicator light is off and the reminder has cleared.
⚠️ Safety First: No electrical hazards beyond normal use.

Power Cycle Control Panel

Easy 10 minutes
  1. Unplug the refrigerator or switch off its breaker for 3–5 minutes.
  2. Restore power to the refrigerator.
  3. Attempt the manual reset again by holding the filter reset button for 3–5 seconds.
⚠️ Safety First: Ensure hands are dry and do not interrupt power abruptly when possible.

Professional Repairs

Control Panel Diagnosis and Repair

Estimated Cost: $150 - $400

When to Call a Professional

When the filter reset button does not respond at all after power cycling.

Preventive Maintenance

  • Replace water filter according to schedule: Frequent reminder indicators and ensures water quality.
    Frequency: ~every 6 months

Frequently Asked Questions

Why is my Bosch Refrigerator Reminder to change water filter not resetting?
The reminder may not have been manually reset, the filter may be improperly installed, or there could be a control panel glitch.
How do I fix Bosch Refrigerator Reminder to change water filter not resetting myself?
Ensure proper filter installation, then press and hold the filter reset button for 3–5 seconds. If that fails, power cycle the refrigerator.
How much does it cost to fix Reminder to change water filter not resetting?
Professional repairs can range from $150 to $400 depending on the diagnosis and necessary repairs.
When should I call a technician for Reminder to change water filter not resetting?
Consider calling a technician if the issue persists after DIY troubleshooting, as it may indicate a more complex electrical or software problem.

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • The water filter reset procedure was not performed correctly.
  • The refrigerator's control board may be malfunctioning or need a software reset.
  • The water filter is not compatible or not properly installed, causing the system to not recognize it.

User Suggested Solutions

  1. Ensure the water filter is properly installed and compatible. Remove the filter and reinstall it, ensuring it clicks into place. Then, press the ice and cool buttons simultaneously for 3 seconds to reset the reminder.

  2. Perform a control board reset. Unplug the refrigerator for 5 minutes, then plug it back in to reset the control board. After reconnecting, check if the reminder has cleared.

  3. If the issue persists, check for software updates or consult the user manual for troubleshooting specific to your model. If needed, contact Bosch customer service for assistance.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. How to turn off the change reminder for water filter on Bosc...

Community Discussions

internal display shows 'FILTRCHG' after changing water filter

Press the ice and cool buttons simultaneously for 3 seconds to turn off the reminder.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!