Bosch Induction Hob: not heating

Professional Repair Guide

What is this symptom?

If your Bosch induction hob powers on but the cooking zones fail to heat cookware, you're not alone. This issue may stem from incompatible cookware, a safety shutdown, or internal faults. Discover effective solutions to restore your hob's functionality.

Urgency: Medium

Important Tips for Bosch Models

Official Bosch guidance emphasizes ensuring induction‑compatible cookware and checking power supply; suggests booking an engineer for faults.

Possible Causes

Cookware incompatibility / improper size

How to Identify: Magnet test fails on the base of the pan (magnet does not stick; cookware base is too small or not flat on the cooking zone.

Part: Cookware (not appliance part)

Overheating / safety shutdown

How to Identify: Zone shuts off after extended use or shows error; hob needs cooling before use.

Part: Internal thermal sensors

Internal sensor or electronic fault

How to Identify: Hob powers on, correct cookware used, settings correct, but still no heat; error codes persist after reset.

Part: Control board / sensor circuitry

DIY Solutions

Verify and use induction‑compatible cookware

Easy 5–10 minutes

Tools Needed: small magnet

Place a magnet on the base of your cookware; ensure it sticks firmly.
Use cookware with a flat bottom and diameter similar to the cooking zone.
Center the cookware on the induction zone before starting.

⚠️ Safety First: Do not use converter discs or adapters; these are discouraged by experts and manufacturers. (Tom's Guide

Deactivate child lock feature

Easy 1–2 minutes

Locate the lock/child lock button on the control panel.
Press and hold the lock button for the duration specified in the manual until the lock indicator turns off.
Try heating a zone again.

Reset power to the hob

Easy 5 minutes

Turn the induction hob off at the mains or circuit breaker.
Wait approximately 1 minute.
Restore power and test heating again.

⚠️ Safety First: Ensure the hob is safely isolated before touching switches or breakers.

Next step

Choose the next step for not heating

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price: $15 - $35
DIY difficulty: Easy
Estimated time: 15-30 mins

Optional: enter your model number

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Replace faulty control board or sensor

Estimated Cost: $200 - $500+

Electrical supply diagnostics and repair

Estimated Cost: $100 - $300

When to Call a Professional

Persistent non‑heating despite verifying cookware compatibility and correct power

Repeated error codes after reset

Unusual smells, flickering lights, or signs of electrical faults

Hob overheats frequently or shuts down unexpectedly

Preventive Maintenance

Clean hob surface and control panel: Residue interfering with pan detection or controls
Frequency: after each use
Check ventilation and keep vents clear: Overheating and automatic shutdown
Frequency: monthly

Frequently Asked Questions

Why is my Bosch Induction Hob not heating?

Common causes include incompatible cookware, overheating safety shutdown, or internal sensor faults.

How do I fix Bosch Induction Hob not heating myself?

Check cookware compatibility, deactivate the child lock, or reset power to the hob.

How much does it cost to fix not heating?

Professional repairs can range from $200 to $500+ for control board replacement or $100 to $300 for electrical diagnostics.

When should I call a technician for not heating?

Consider professional help if DIY solutions don’t work or if you suspect internal electronic faults.

References & Sources

Bosch Induction Hob Not Working (Bosch Support) Official
Why Is My Induction Hob Not Working? (Domex UK guide) Community

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

60%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Faulty induction coil or element
Incompatible cookware or cookware not detected
Control board malfunction

User Suggested Solutions

Check and replace the cookware. Ensure that the pot or pan is induction-compatible and has a flat bottom. Try using another known compatible cookware to test the hob.
Inspect the induction coil for visible damage or signs of wear. If damaged, replace the coil. This may require disassembling the hob.
Test the control board for faults. If the board is malfunctioning, it may need to be replaced. This typically involves checking connections and possibly replacing the board.