Bosch Dishwasher: not working

Professional Repair Guide

What is this symptom?

Is your Bosch dishwasher not working? You may find it unresponsive, failing to start a cycle, or showing no power. Common issues include a door not securely latched, control lock activation, or no electrical supply. Understanding these causes can help you troubleshoot effectively and restore your dishwasher to working order.

Urgency: Medium

Important Tips for Bosch Models

  • Bosch dishwasher official guide highlights door closure, water fill, and latch issues for not starting.

Possible Causes

Door not securely latched

How to Identify: Door must be fully closed and latched; control will not start if door is ajar.

Part: Door latch / door sensor

Control lock / child lock active

How to Identify: Controls unresponsive despite power; lock indicator may be lit.

Part: Control panel lock

No electrical power to dishwasher

How to Identify: No lights/display; outlet not providing power as tested with another device.

Part: Power supply / breaker / outlet

Faulty door latch or switch

How to Identify: Door appears closed but dishwasher still won’t start; some models blink lights.

Part: Door latch assembly

Control board failure

How to Identify: Dishwasher unresponsive with power present; no error codes; buttons fail.

Part: Main control board

Water supply issues preventing start

How to Identify: Dishwasher does not fill or begins and stops immediately; indicator on some models.

Part: Water inlet valve / supply hose

DIY Solutions

Ensure door is fully closed and latched

Easy 2-5 minutes
  1. Open dishwasher door fully.
  2. Check for obstructions on door gasket or latch.
  3. Close door firmly until it latches.

Deactivate control lock

Easy 1-3 minutes
  1. Locate control lock/child lock icon on panel.
  2. Press and hold indicated button(s) per manual until lock indicator turns off.

Check power supply and reset breaker

Moderate 5-10 minutes
  1. Ensure dishwasher is plugged into outlet.
  2. Check home breaker panel for tripped breaker; reset if needed.
  3. Unplug dishwasher for 1 minute then plug back in.
⚠️ Safety First: Turn off breaker before inspecting wiring

Professional Repairs

Replace door latch/switch assembly

Estimated Cost: $40 - $120

Control board replacement

Estimated Cost: $150 - $400

Water inlet valve repair/replacement

Estimated Cost: $70 - $200

When to Call a Professional

Dishwasher has power but still won’t start after DIY checks
Internal electronic failure suspected (control board)
Water inlet or pump parts failure
Repeated error codes appear

Preventive Maintenance

  • Clean door gasket and latch area: Door closure issues that prevent starting
    Frequency: Monthly
  • Run cleaning cycle / clean filters: Clogs affecting water flow and operation
    Frequency: Monthly

Frequently Asked Questions

Why is my Bosch Dishwasher not working?
Common causes include a door not securely latched, control lock activation, or no electrical power.
How do I fix Bosch Dishwasher not working myself?
Check if the door is fully closed, deactivate control lock, and ensure power supply is intact.
How much does it cost to fix not working?
Professional repairs range from $40 for door latch replacement to $400 for control board issues.
When should I call a technician for not working?
If DIY solutions fail or if issues seem complex, it's best to consult a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

80%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Excessive foam caused by using non-dishwasher detergent
  • Clogged drain filter or drain hose
  • Faulty door latch preventing proper operation

User Suggested Solutions

  1. Ensure you are using the correct dishwasher detergent. If foam is present, run a rinse cycle without detergent to clear it out. Check for any remaining foam and wipe it down before running another cycle.

  2. Inspect and clean the drain filter and drain hose. Remove any debris or buildup that may be obstructing water flow. Reassemble and test the dishwasher.

  3. Check the door latch for proper function. If it is damaged or not closing securely, replace the latch to ensure the dishwasher can operate correctly.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Dishwasher filled with foam and doesnt work any more

Community Discussions

Dishwasher filled with foam and doesn't work anymore

Airing out the dishwasher resolved the error code and allowed it to run properly.

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!