Bosch Dishwasher: not running

Professional Repair Guide

What is this symptom?

If your Bosch dishwasher is not running, it may not start a cycle even when the start button is pressed. You might notice a complete lack of motor or pump sounds, and there could be no lights or display, or lights may be on with no operational activity. This issue can stem from common causes such as a faulty door latch or a lack of power supply.

Urgency: Medium

Possible Causes

Door latch/door not fully closed

How to Identify: Dishwasher shows no start or cycle begins then immediately stops; door feels not fully closed or latch feels loose.

Part: Door latch/interlock switch

No power supply or tripped breaker

How to Identify: Dishwasher has no lights/display; other appliances on same circuit may not work; breaker appears tripped.

Part: Circuit breaker/socket/power cord

Preventive Maintenance

  • Clean door latch and surrounding area: Door latch sticking and start failures
    Frequency: monthly
  • Verify power connection and outlet condition: Power related start issues
    Frequency: every few months

Frequently Asked Questions

Why is my Bosch Dishwasher not running?
Common reasons include a door latch issue or no power supply due to a tripped breaker.
How do I fix Bosch Dishwasher not running myself?
Currently, there are no DIY solutions provided for this issue.
How much does it cost to fix not running?
Professional repair costs can vary; consult a technician for a detailed estimate.
When should I call a technician for not running?
If the issue persists after checking the door and power supply, it’s advisable to call a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

100%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Door not closing properly due to obstruction (2 mentions)
  • Drain pump issues (1 mentions)
  • Electrical reset needed (1 mentions)

User Suggested Solutions

  1. Remove obstruction preventing door closure

    Success rate: 40.0%
  2. Check for debris in the drain pump

    Success rate: 20.0%
  3. Press and hold the reset button to reset the dishwasher

    Success rate: 20.0%

Community Discussions

won’t run, flashing red light

The issue was caused by a spoon preventing the door from closing properly.

won't run with middle rack in place

The issue was related to the middle rack preventing the door from shutting properly.

won't run again just flashes the lights

Press and hold the reset button for 3-5 seconds to reset the dishwasher.

loud buzzing noise and won’t run

Check for debris in the drain pump; it is likely the cause of the buzzing noise.

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!