Bosch Dishwasher: making loud noises
What is this symptom?
Is your Bosch dishwasher making loud, unusual noises during wash or drain cycles? If you hear grinding, rattling, or excessive vibration, it could indicate improper loading, clogged spray arms, or issues with the drain pump. Addressing these noises promptly can help maintain your appliance's efficiency and prolong its lifespan.
Important Tips for Bosch Models
- Bosch notes that some noise is normal and louder operation doesn’t always indicate a fault; check manufacturer’s spec for expected noise levels.
Possible Causes
Improper loading or loose items contacting spray arms
How to Identify: Noise correlates with water jets; unusual banging or clattering; items move or hit interior during operation.
Part: Dishware/Utensils & Spray Arms
Clogged or dirty spray arms or filters causing noisy water flow
How to Identify: Noise occurs with water circulation; water jets may be weak; visible debris on spray arms or filters.
Part: Spray Arms, Filters
Worn or loose drain pump/impeller
How to Identify: Grinding or loud noises during drain cycle rather than wash; possible debris caught in impeller area.
Part: Drain Pump / Impeller
Installation or vibration amplification
How to Identify: Noise more noticeable when unit vibrates against cabinets or unstable base; unit not level.
Part: Mounting / Cabinet
Normal operational sounds at higher dB levels
How to Identify: Sound is consistent with described normal operation, no functional issues; not louder than usual for model spec.
Part: General Mechanism
DIY Solutions
Rearrange dishes and check for loose items
- Open dishwasher and remove items that could contact spray arms.
- Reposition dishes and utensils to avoid contact with rotating spray arms.
- Ensure items like bottles are secured or laid flat so they won’t move.
Clean spray arms and filters
- Turn off and unplug dishwasher for safety.
- Remove and inspect spray arms for debris; rinse under water.
- Remove and clean filters at bottom of dishwasher; clear visible debris.
- Reassemble parts and test operation.
Level dishwasher and check installation stability
- Use a level to check if dishwasher is even.
- Adjust feet or mounting brackets so unit sits level.
- Ensure the dishwasher is securely anchored to cabinets and base.
Professional Repairs
Replace worn or faulty drain pump or impeller
Service or replace motor/circulation pump
When to Call a Professional
Preventive Maintenance
-
Regularly clean spray arms and filters: Noise due to debris blockage
Frequency: Monthly -
Check leveling and mounting annually: Vibration-related noise
Frequency: Annually
Frequently Asked Questions
Why is my Bosch Dishwasher making loud noises?
How do I fix Bosch Dishwasher making loud noises myself?
How much does it cost to fix making loud noises?
When should I call a technician for making loud noises?
References & Sources
- Bosch Dishwasher Noise FAQ Official
- 5 Reasons Why Your Bosch Dishwasher Is Loud Repair-Blog
Community Analytical Insights
Analysis based on real user discussions from appliance repair communities
Can I Fix This Myself?
Common Issues Reported by Users
- Obstruction in the spray arm or filter
- Worn or damaged circulation motor
- Loose or damaged components (e.g., door latch, tub, or mounts)
User Suggested Solutions
-
Inspect and clean the spray arm and filter. Remove any debris or obstructions that may cause noise during operation. Check the spray arm for proper rotation.
-
Test the circulation motor by listening for unusual sounds. If the motor is noisy or not functioning, consider replacing it. Disconnect power, remove the motor, and install a new one following the manufacturer's instructions.
-
Check for loose or damaged components. Tighten or replace any loose parts, especially around the door latch and tub mounts. Ensure that all screws and fasteners are secure.
Analysis based on 1 community discussions
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
making loud noises
Possible issue with the circulation motor, either due to an obstruction or motor failure.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!