Fisher & Paykel Refrigerator Error F1

⚡ Quick Answer: The F1 error code on your Fisher & Paykel refrigerator indicates a control module fault, which impacts the temperature sensor's functionality. This of... ⚠️ Difficulty Varies

What Does Error F1 Mean?

The F1 error code on your Fisher & Paykel refrigerator indicates a control module fault, which impacts the temperature sensor's functionality. This often leads to inconsistent cooling and fluctuating temperatures. If you see the F1 code displayed on the error panel, it may be accompanied by alarms or beeping sounds, signaling that service assistance is required to diagnose and repair the issue.

Common Symptoms:

  • F1 displayed on the refrigerator/error panel
  • Possible alarm or beeping accompanying the F1 code

Possible Causes

  • Control module fault (high)

How to Fix Error F1

DIY Fix Restart refrigerator power

  1. Unplug the refrigerator from the electrical outlet or switch off its dedicated circuit breaker.
  2. Wait about 5 minutes.
  3. Restore power and check whether the F1 code returns.

Technician Only Diagnose and repair control module issue

  1. Use diagnostic tools to read stored fault codes and control module status.
  2. Inspect wiring harnesses and connectors to the control module for damage or loose connections.
  3. Test or replace the control module as needed according to service manual procedures.

Parts needed: Control module / main board, Wiring harnesses and connectors (if applicable)

🛑 When to Call a Pro:
  • If the F1 code persists after power cycling
  • If the refrigerator is not functioning normally (cooling, display, alarms) while F1 is present
  • If there are signs of electrical or control board damage

Next step

Choose the next step for F1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 10k ohms at 25°C
part_number Fisher & Paykel 62002225
voltage_rating 120V AC

Common Questions

What does F1 error mean on fisher & paykel refrigerator?

F1 error indicates a control module fault, affecting temperature sensor and cooling.

Can I fix fisher & paykel refrigerator F1 error myself?

Yes, you can try restarting the refrigerator by unplugging it for 5 minutes.

How much does it cost to fix F1 error?

Repair costs vary; typically moderate to high based on parts and labor.

When should I call a technician for F1?

Call a technician if the F1 code persists after power cycling or if cooling issues continue.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!