Fisher & Paykel Refrigerator Error E14

⚡ Quick Answer: The Fisher & Paykel refrigerator error code E14 suggests a potential malfunction related to the temperature sensor, which can lead to inconsistent coo... ✅ DIY Fixable

What Does Error E14 Mean?

The Fisher & Paykel refrigerator error code E14 suggests a potential malfunction related to the temperature sensor, which can lead to inconsistent cooling and unusual display behavior. If you encounter this error, it’s important to verify the context of the error, as it may not correspond with documented fault codes for your appliance. Power cycling the refrigerator may help reset the system, but persistent issues should prompt you to seek professional assistance.

Possible Causes

  • Temperature Sensor

How to Fix Error E14

DIY Fix Verify the error context and display

  1. Check the appliance model number and ensure you are viewing the refrigerator’s control panel display when the code appears.
  2. Power‑cycle the refrigerator by unplugging the unit for 5–10 minutes, then plug it back in and observe if the code reappears.
  3. Ensure the code is not associated with a connected component (e.g., ice maker or dispenser) that may use different code sets.

Technician Only Contact Fisher & Paykel support or authorized service

  1. Provide the exact model number and photos/screenshots of the error code display to the service representative.
  2. Request whether E14 corresponds to a specific fault in your model’s diagnostic mode or if it is a misinterpretation of another code.
🛑 When to Call a Pro:
  • If the code persists after a power cycle and cannot be correlated with a known refrigerator fault code from official documentation.
  • If the refrigerator exhibits malfunctioning cooling, alarms, or other operational issues concurrently with the E14 display.

Next step

Choose the next step for E14

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 10k ohms at 25°C
part_number Fisher & Paykel 61020
voltage_rating N/A

Common Questions

What does E14 error mean on fisher & paykel refrigerator?

E14 indicates a potential temperature sensor malfunction, affecting cooling.

Can I fix fisher & paykel refrigerator E14 error myself?

Yes, you can try power cycling the refrigerator and verifying the error context.

How much does it cost to fix E14 error?

Repair costs vary by model and region; consult a technician for an estimate.

When should I call a technician for E14?

Call a technician if the error persists after power cycling or if cooling issues continue.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!