Fisher & Paykel Refrigerator Error E13
⚡ Quick Answer: The E13 error code on Fisher & Paykel refrigerators indicates a potential malfunction in the cooling system, which may lead to unusual sounds and a wa... ⚠️ Difficulty Varies
What Does Error E13 Mean?
The E13 error code on Fisher & Paykel refrigerators indicates a potential malfunction in the cooling system, which may lead to unusual sounds and a warm interior. To address this issue, first verify that the displayed code is accurate and corresponds to your refrigerator model. If the error persists without any additional symptoms, it is advisable to contact Fisher & Paykel support for further assistance.
Possible Causes
- Faulty evaporator fan
- Blocked air vents
- Defective temperature sensor
How to Fix Error E13
DIY Fix Verify Code and Device
- Check the exact model number of your Fisher & Paykel refrigerator.
- Ensure that the displayed code is indeed E13 and from the refrigerator display rather than another appliance (e.g., washer).
- Refer to the refrigerator’s official user manual or support site for your exact model’s error code list.
- Capture a photo of the display and note any accompanying indicator lights or conditions (e.g., beeping, compartment displayed).
Technician Only Contact Fisher & Paykel Support
- Provide the exact model number and a picture of the error code display to Fisher & Paykel support.
- Ask for error code interpretation specific to your model.
- If no official meaning for E13 on that model exists, request diagnostic procedures.
- If the error persists after verifying the code and model documentation, contact Fisher & Paykel authorized service.
- If there are any additional symptoms such as temperature issues, leaks, or unusual noises accompanying the code.
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Evaporator Fan Motor
Circulates cold air from the evaporator through the refrigerator or freezer compartments.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 20W |
|---|---|
| component | Evaporator Fan |
| resistance | 10-30 ohms |
| part_number | Fisher & Paykel 61080 |
| voltage_rating | 120V AC |
Common Questions
What does E13 error mean on Fisher & Paykel refrigerator?
E13 indicates a potential cooling system malfunction, often resulting in warm temperatures and unusual sounds.
Can I fix Fisher & Paykel refrigerator E13 error myself?
Yes, verify the error code and model, and consult the user manual. If the issue persists, consider contacting support.
How much does it cost to fix E13 error?
Repair costs can vary based on the model and region; contacting service for an estimate is advisable.
When should I call a technician for E13?
Call a technician if the error persists after verification or if you notice additional symptoms, such as temperature issues or leaks.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!