Fisher & Paykel Refrigerator Error 5

⚡ Quick Answer: The Fisher & Paykel refrigerator Error Code 5 indicates a malfunction in the freezer compartment temperature sensor (FC sensor). This fault can lead t... ✅ DIY Fixable

What Does Error 5 Mean?

The Fisher & Paykel refrigerator Error Code 5 indicates a malfunction in the freezer compartment temperature sensor (FC sensor). This fault can lead to temperature instability in the freezer, causing food to spoil. A beeping alarm with five beeps and a blinking spanner icon when the door is opened are common symptoms. If this error persists, further diagnosis is needed to address potential sensor or wiring issues.

Common Symptoms:

  • Beeping alarm with five beeps indicating Fault Code 5
  • Possible temperature instability in the freezer compartment
  • Spanner icon blinking on display when door opened

Possible Causes

  • Freezer compartment temperature sensor fault (medium)

How to Fix Error 5

DIY Fix Power cycle refrigerator

  1. Unplug the refrigerator from power.
  2. Wait approximately 10 minutes.
  3. Plug the refrigerator back in and allow it to stabilize.

Technician Only Diagnose and service freezer compartment sensor

  1. Visually inspect the freezer compartment temperature sensor and wiring.
  2. Measure sensor resistance/continuity with a multimeter.
  3. Check sensor connection at the control board and assess for corrosion or damage.
  4. Replace faulty sensor or repair wiring as needed.

Parts needed: FC (freezer compartment) temperature sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If Fault Code 5 persists after a power cycle
  • If temperature is unstable or freezer is not maintaining set point
  • If sensor wiring or internal components appear damaged

Next step

Choose the next step for 5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5k-10k ohms
part_number Fisher & Paykel 610013
voltage_rating N/A

Common Questions

What does 5 error mean on Fisher & Paykel refrigerator?

Error 5 signifies a fault in the freezer compartment sensor, leading to temperature instability.

Can I fix Fisher & Paykel refrigerator 5 error myself?

Yes, you can try power cycling the refrigerator by unplugging it for 10 minutes.

How much does it cost to fix 5 error?

Estimated repair costs range from ¥5,000 to ¥20,000 for parts, plus labor.

When should I call a technician for 5?

Call a technician if the error persists after a power cycle or if you see damaged wiring.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!