Fisher & Paykel Dryer Error ERR2
⚡ Quick Answer: The Fisher & Paykel dryer ERR2 error indicates a malfunction, typically related to the heating element, which can cause the dryer to stop mid-cycle or... ✅ DIY Fixable
What Does Error ERR2 Mean?
The Fisher & Paykel dryer ERR2 error indicates a malfunction, typically related to the heating element, which can cause the dryer to stop mid-cycle or fail to produce heat. This error may also stem from drainage issues or problems with the thermistor/temperature sensor. Regular maintenance and checks can help prevent this issue from arising.
Common Symptoms:
- Dryer displays ERR2 (or E2) mid‑cycle
- Dryer may stop mid‑cycle
Possible Causes
- Drain or water removal issue (community repair guides) (medium)
- Thermistor/temperature sensor overheat or out‑of‑range (independent diagnostic guide) (medium)
How to Fix Error ERR2
DIY Fix Basic checks and resets
- Ensure dryer door is fully closed and keylock is off if applicable (Fisher & Paykel general fault advice).
- Turn off and unplug the dryer for a few minutes, then restart to see if error clears.
- Check that any water collection tank (condensing models) is not full and empty if necessary.
Technician Only Inspect drainage and temperature components
- Inspect and clear any blockages in the drain pump area and hoses that could prevent proper water removal.
Parts needed: Drain pump, Drain hose, Temperature/thermistor sensors
- Persistent ERR2/E2 after basic resets and cleaning
- Signs of electrical fault or burning smell
- Water remains in drum and isn’t draining despite clearing filters
Next step
Choose the next step for ERR2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | F&P 402144P |
| voltage_rating | 240V AC |
Common Questions
What does ERR2 error mean on Fisher & Paykel dryer?
ERR2 indicates a malfunction that can prevent heating or cause mid-cycle stops.
Can I fix Fisher & Paykel dryer ERR2 error myself?
Yes, try basic checks like ensuring the door is closed and emptying the water tank.
How much does it cost to fix ERR2 error?
Repair costs range from $100 to $300, depending on parts and labor.
When should I call a technician for ERR2?
Call a technician if the error persists after resets or if you notice electrical faults.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!