Fisher & Paykel Dryer Error ERR11

DIY Fix Verify the exact error code format and model

1. Check the dryer display carefully — note whether it shows “ERR11”, “E11” or another code.
2. Locate your dryer’s exact model number (on the door frame/serial plate) and consult the specific user manual for that model from Fisher & Paykel’s support site or a trusted manual repository (e.g., ManualsLib).

Technician Only Check for code misinterpretation and diagnostic scan

1. Confirm whether the displayed code is actually “ERR11” or a variant like “E11” (without prefix). “E11” in some community‑compiled charts refers to condenser pump/water level issues on certain condensing models.
2. Use service diagnostics (if supported by the model) to read stored fault codes through the dryer’s service interface.
3. Inspect condenser pump/water detection circuitry on condensing dryers if the code corresponds to E11.
4. Verify main control board communication and water level sensing circuits for faults if applicable.

Parts needed: Multimeter for sensor checks, Service interface tool (if available)