Euromaid Washing Machine Error E21
⚡ Quick Answer: The Euromaid washing machine error E21 indicates a drainage malfunction, typically caused by a clogged drain hose or filter, or a faulty drain pump. T... ✅ DIY Fixable
What Does Error E21 Mean?
The Euromaid washing machine error E21 indicates a drainage malfunction, typically caused by a clogged drain hose or filter, or a faulty drain pump. This error often results in water remaining in the drum after a wash cycle, and may be accompanied by unusual noises during the spin cycle. Addressing this issue promptly can help restore proper functionality and prevent further damage.
Common Symptoms:
- Water not draining at end of wash cycle
- Cycle stops midway and displays E21
- Water remains in drum after attempt to drain
Possible Causes
- Clogged drain system (filter/hose) (medium)
- Faulty or obstructed drain pump (medium)
How to Fix Error E21
DIY Fix Check and clear drain hose and filter
- Unplug the washing machine from power.
- Locate the drain hose at the rear and ensure it’s not kinked or twisted.
- Detach the hose and flush with water to clear any debris.
- Locate the pump filter (typically at bottom front), open access, and remove any lint or objects.
- Reattach everything securely and run a short drain cycle.
Technician Only Inspect/repair drain pump and internal components
- With power off, remove bottom access panel to inspect drain pump for damage or obstructions.
- Test pump function with multimeter and by direct power if safe to do so.
- Replace drain pump if motor failure or irreparable damage is confirmed.
- Verify any associated wiring and connections to sensors related to the drain circuit.
Parts needed: drain pump assembly, drain hose, pump filter
- After checking hoses and filter if error persists
- If water leaks from base of machine
- If unusual noises occur when pump should be operating
Next step
Choose the next step for E21
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | EPM-12345 |
| voltage_rating | 240V AC |
Common Questions
What does E21 error mean on euromaid washing machine?
E21 indicates a drainage malfunction, often resulting in water not draining and unusual noises.
Can I fix euromaid washing machine E21 error myself?
Yes, you can check and clear the drain hose and filter to resolve the issue.
How much does it cost to fix E21 error?
$50–$150 for parts like the pump, plus additional labor costs depending on your region.
When should I call a technician for E21?
Call a technician if the error persists after checking hoses and filters, if water leaks from the machine, or if you hear unusual noises.
Sources & References
- Euromaid official washing machine error codes (official)
- General Chinese article about E21 drainage timeout (community)
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!