Danby Wine Cooler Error HH

⚡ Quick Answer: The Danby Wine Cooler HH error indicates a high temperature condition, meaning the internal temperature exceeds the set threshold. This is usually acc... ✅ DIY Fixable

What Does Error HH Mean?

The Danby Wine Cooler HH error indicates a high temperature condition, meaning the internal temperature exceeds the set threshold. This is usually accompanied by a continuous alarm and a flashing display. If you notice the HH error, it is likely that your wine cooler is not cooling properly, which can negatively affect your wine's quality.

Common Symptoms:

  • Unit displays HH error while running
  • Internal temperature higher than setpoint
  • Wine not cooling properly

Possible Causes

  • Internal temperature above acceptable range (medium)

How to Fix Error HH

DIY Fix Check basic cooling conditions and ventilation

  1. Ensure the door is fully closed and seals are intact.
  2. Check that the unit is placed with adequate clearance for ventilation.
  3. Avoid placing warm bottles inside during high-temperature alarm.
  4. Monitor temperature after correcting these conditions.

Technician Only Diagnose cooling system and sensors

  1. Measure internal temperature with an independent thermometer.
  2. Check temperature sensor/thermistor for correct resistance and placement.
  3. Inspect condenser coils for dust and airflow obstruction.
  4. Verify compressor operation and refrigerant flow.

Parts needed: Temperature sensor/thermistor, Condenser coils, Compressor

🛑 When to Call a Pro:
  • If internal temperature remains high after ventilation checks
  • If compressor is not running or making unusual noises
  • If temperature sensor tests out of specification

Next step

Choose the next step for HH

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

$15 - $35 · Easy · 15-30 mins

Check fit & price
Possible related component

Condenser Coil Assembly

Releases heat from the refrigerant circuit and must match the appliance's sealed-system design.

$80 - $400 · Hard · 120-240 mins

Check fit & price
Possible related component

Compressor

Compresses refrigerant within the sealed cooling system and requires specialized service equipment.

$180 - $600 · Hard · 120-240 mins

Check fit & price
Model number required

Model-compatible Wine Cooler parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 100W
component Thermostat
resistance 5-15 ohms
part_number Danby 100048
voltage_rating 120V AC

Common Questions

What does HH error mean on Danby Wine Cooler?

The HH error indicates that the internal temperature is too high, exceeding the set threshold.

Can I fix Danby Wine Cooler HH error myself?

Yes, check for proper door sealing, ventilation, and avoid placing warm bottles inside.

How much does it cost to fix HH error?

Repair costs vary; sensor replacements range from $20–$100, while compressor repairs are significantly higher.

When should I call a technician for HH?

Call a technician if the temperature remains high after checks, or if the compressor is silent or noisy.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!