Daikin Air Conditioner Error L8
⚡ Quick Answer: The Daikin Air Conditioner L8 error indicates a communication failure between the indoor and outdoor units, typically due to an overload protection ac... ✅ DIY Fixable
What Does Error L8 Mean?
The Daikin Air Conditioner L8 error indicates a communication failure between the indoor and outdoor units, typically due to an overload protection activation in the inverter compressor. This can lead to the outdoor unit stopping, ceasing the cooling or heating functions. Symptoms may include an abnormal current draw prior to shutdown, and the unit may display flashing indicators. If this error persists, professional diagnosis is recommended.
Common Symptoms:
- Outdoor unit stops operating when L8 is displayed
- Cooling/heating function ceases upon error code display
- Possible abnormal current draw or compressor load prior to shutdown
Possible Causes
- Inverter compressor overload (electronic thermal protection) (medium)
- Compressor hardware issue (internal fault) (medium)
- Compressor harness/connectors fault (medium)
How to Fix Error L8
DIY Fix Basic user check and safe restart
- Turn off the AC unit using the remote or power switch.
- Switch off the circuit breaker supplying the unit and wait ~30 seconds.
- Turn circuit breaker back on and attempt normal operation.
Technician Only Professional diagnosis and repair
- Inspect the inverter compressor and measure current draw.
- Check compressor harness and connections for corrosion or looseness.
- Test the inverter board and associated power electronics for faults.
- Replace defective components (compressor, harness, or inverter board) as identified.
Parts needed: Inverter compressor, Compressor harness/connectors, Inverter control board
- If L8 persists after power reset
- If there are unusual noises, burning smell, or heat from outdoor unit
Next step
Choose the next step for L8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Compressor
Compresses refrigerant within the sealed cooling system and requires specialized service equipment.
- Typical part-only price
- $180 - $600
- DIY difficulty
- Hard
- Estimated time
- 120-240 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
HVAC Control Board
Controls fan, compressor, sensor, and communication functions in the HVAC unit.
Model-compatible Air Conditioner parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Air Conditioner Fin Cleaner
For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.
Model-Compatible Washable AC Filter
A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Communication Cable |
| resistance | N/A |
| part_number | DAIKIN 934100A |
| voltage_rating | 220V AC |
Common Questions
What does L8 error mean on Daikin Air Conditioner?
L8 indicates a communication failure and inverter compressor overload, causing the outdoor unit to stop.
Can I fix Daikin Air Conditioner L8 error myself?
Yes, you can try a power reset by turning off the unit and circuit breaker, waiting 30 seconds, then restoring power.
How much does it cost to fix L8 error?
Repair costs for the L8 error can range from medium to high, depending on the region and specific model.
When should I call a technician for L8?
Call a technician if the L8 error persists after a power reset or if you notice unusual noises, burning smells, or heat from the outdoor unit.
Sources & References
- What is a L8 fault? – Daikin NZ knowledge base (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!