Daikin Air Conditioner Error H8-00
⚡ Quick Answer: The Daikin Air Conditioner error H8-00 signals a communication failure between the indoor and outdoor units, commonly caused by a malfunctioning DC cu... ✅ DIY Fixable
What Does Error H8-00 Mean?
The Daikin Air Conditioner error H8-00 signals a communication failure between the indoor and outdoor units, commonly caused by a malfunctioning DC current sensor. Symptoms may include the unit shutting down shortly after startup, unresponsive remote control commands, and blinking display lights. This issue can prevent the air conditioner from cooling effectively, necessitating prompt attention.
Common Symptoms:
- Air conditioner may stop operating or shut down shortly after startup.
- Unit may fail to respond to remote control commands.
- Displayed system temperature or settings may not change as expected.
- Continuous blinking lights or repeated error code display.
Possible Causes
- DC current sensor malfunction (medium)
How to Fix Error H8-00
DIY Fix Power cycle and basic check
- Turn off the unit using the remote controller or unit power button.
- Disconnect the air conditioner from the power source for 5–10 minutes to allow internal electronics to reset.
- Reconnect power and restart the unit to see if the code clears.
Technician Only Inspect and test DC current sensor and associated electronics
- Access the unit’s control board and inspect the DC current sensor and wiring harness for damage or loose connections.
- Use diagnostic equipment to measure current sensor output and verify correct electrical behavior.
- If sensor is faulty, replace with manufacturer-approved DC current sensor component.
- Check related power electronics (inverter board/transistors) if sensor replacement alone does not resolve fault.
Parts needed: DC current sensor, Control PCB or inverter board components, Wiring harness/connectors
- If the error reappears after power cycling.
- If the unit makes unusual noises, fails to start cooling/heating, or shows additional codes.
- If internal component inspection or repair is needed.
Next step
Choose the next step for H8-00
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
HVAC Control Board
Controls fan, compressor, sensor, and communication functions in the HVAC unit.
- Typical part-only price
- $90 - $320
- DIY difficulty
- Hard
- Estimated time
- 45-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Air Conditioner parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Air Conditioner Fin Cleaner
For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.
Model-Compatible Washable AC Filter
A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Communication Cable |
| resistance | N/A |
| part_number | DAIKIN 937202A |
| voltage_rating | 230V AC |
Common Questions
What does H8-00 error mean on Daikin Air Conditioner?
H8-00 indicates a communication failure between the indoor and outdoor units, often due to a DC current sensor malfunction.
Can I fix Daikin Air Conditioner H8-00 error myself?
Yes, you can try power cycling the unit by disconnecting it for 5-10 minutes to reset it.
How much does it cost to fix H8-00 error?
Repair costs for the H8-00 error typically range from ¥15,000 to ¥60,000, depending on the region and model.
When should I call a technician for H8-00?
Call a technician if the error persists after power cycling, if you hear unusual noises, or if internal component inspection is needed.
Sources & References
- Daikin Troubleshooting: Error Codes & Resetting (community)
- Daikin India AC Error Codes List (community)
- Quick and Effective Solutions for Daikin Air Conditioner Error H8 (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!