Daikin Air Conditioner Error H0

⚡ Quick Answer: The Daikin Air Conditioner H0 error indicates a communication failure between the indoor and outdoor units, often due to a sensor-related fault in the... ✅ DIY Fixable

What Does Error H0 Mean?

The Daikin Air Conditioner H0 error indicates a communication failure between the indoor and outdoor units, often due to a sensor-related fault in the outdoor unit. Symptoms include the operation stopping with the H0 code displayed, and while the compressor may not receive power, the indoor and outdoor fans might still run. This issue typically arises from a problem with the sensor or wiring connection in the outdoor unit.

Common Symptoms:

  • Operation stops with H0 displayed
  • Compressor may not receive power but indoor/outdoor fans may still run

Possible Causes

  • Outdoor unit sensor fault (medium)

How to Fix Error H0

DIY Fix Power cycle the unit

  1. Turn off air conditioner operation with remote
  2. Switch off dedicated breaker or unplug AC
  3. Wait ~1 minute
  4. Restore power and restart AC

Technician Only Inspect outdoor unit wiring and sensors

  1. Disconnect power completely
  2. Check outdoor unit sensor harness and connectors
  3. Measure sensor resistance/continuity for the problematic sensor
  4. Replace defective sensor or repair wiring as needed

Parts needed: Outdoor unit sensors, Wiring harness connectors, Possibly outdoor control board

🛑 When to Call a Pro:
  • Error persists after power cycle
  • Signs of wiring damage, burning smell, or no compressor operation

Technical Specifications

wattage N/A
component Communication Cable
resistance N/A
part_number DAIKIN 4P-2.5MM
voltage_rating 220V AC

Common Questions

What does H0 error mean on Daikin Air Conditioner?

H0 indicates a communication failure between the indoor and outdoor units, usually due to a sensor fault.

Can I fix Daikin Air Conditioner H0 error myself?

Yes, you can try power cycling the unit by turning it off and waiting for about a minute.

How much does it cost to fix H0 error?

The estimated repair cost ranges from ¥10,000 to ¥50,000.

When should I call a technician for H0?

Call a technician if the error persists after power cycling or if you notice signs of wiring damage.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!