Daikin Air Conditioner Error E8
⚡ Quick Answer: The Daikin Air Conditioner E8 error indicates a compressor overcurrent issue, causing the unit to stop operation. This error is often accompanied by u... ✅ DIY Fixable
What Does Error E8 Mean?
The Daikin Air Conditioner E8 error indicates a compressor overcurrent issue, causing the unit to stop operation. This error is often accompanied by unusual humming sounds and prevents the system from cooling effectively. The outdoor unit detects the overcurrent and initiates a protective shutdown to avoid further damage. To resolve this, a power reset may be needed, but persistent issues require professional inspection of the compressor and electrical components.
Common Symptoms:
- Air conditioner stops operation and displays or flashes E8
- Unit will not restart normally until condition clears or reset is performed
Possible Causes
- Compressor overcurrent detected causing protective shutdown (medium)
- Compressor electrical or control component malfunction (medium)
How to Fix Error E8
DIY Fix Perform a power reset and check basic conditions
- Turn off the air conditioner and cut power supply at the dedicated breaker or unplug
- Wait at least one minute before restoring power
- Ensure filters are clean and airflow is not heavily restricted
- Try restarting the unit after reset
Technician Only Inspect outdoor compressor circuit and components
- Verify compressor current draw and compare against specifications
- Test compressor motor windings and run capacitor
- Inspect outdoor unit PCB and power transistor for damage or signs of failure
- Check power supply quality and wiring integrity to outdoor unit
Parts needed: Compressor motor, Outdoor unit PCB, Power transistor / inverter module, Capacitors and related electrical components
- If error persists after power reset
- If unit shows signs of electrical smell or overheating
- If compressor does not start or trips overcurrent consistently
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Compressor
Compresses refrigerant within the sealed cooling system and requires specialized service equipment.
- Typical part-only price
- $180 - $600
- DIY difficulty
- Hard
- Estimated time
- 120-240 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
HVAC Control Board
Controls fan, compressor, sensor, and communication functions in the HVAC unit.
Model-compatible Air Conditioner parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Air Conditioner Fin Cleaner
For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.
Model-Compatible Washable AC Filter
A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Compressor |
| resistance | 5-10 ohms |
| part_number | Daikin 4E118084 |
| voltage_rating | 220V AC |
Common Questions
What does E8 error mean on Daikin Air Conditioner?
E8 error indicates a compressor overcurrent issue, causing the unit to stop and display this code.
Can I fix Daikin Air Conditioner E8 error myself?
Yes, perform a power reset, check airflow, and ensure filters are clean.
How much does it cost to fix E8 error?
Repair costs range from $200 to $800+, depending on parts and labor.
When should I call a technician for E8?
Call a technician if the error persists after a reset or if there are signs of overheating.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!