Daikin Air Conditioner Error A1

⚡ Quick Answer: The Daikin Air Conditioner A1 error code indicates a communication failure between the indoor and outdoor units, primarily caused by a malfunction in ... ⚠️ Difficulty Varies

What Does Error A1 Mean?

The Daikin Air Conditioner A1 error code indicates a communication failure between the indoor and outdoor units, primarily caused by a malfunction in the indoor unit's control PCB. This error results in the indoor unit failing to start, with the AC ceasing to operate and displaying the A1 code. Normal operation cannot resume until the error is resolved, typically requiring inspection and potential repair of the PCB or its connections.

Common Symptoms:

  • Indoor unit fails to start
  • AC stops running and displays A1
  • Normal operation cannot resume until error cleared

Possible Causes

  • Indoor unit printed circuit board (PCB) malfunction (medium)
  • Loose PCB connector or poor internal connection (low)

How to Fix Error A1

DIY Fix Basic reset attempt

  1. Turn off the air conditioner using the remote or power button
  2. Switch off circuit breaker or unplug the unit
  3. Wait about 30–60 seconds
  4. Restore power and restart the air conditioner

Technician Only Inspect and repair indoor unit PCB and connections

  1. Deactivate power at the breaker and verify zero voltage
  2. Open indoor unit access panel
  3. Inspect PCB for visible damage, burnt components, or swelling
  4. Check PCB connectors and wiring harnesses for secure connection
  5. Replace faulty PCB or connectors as needed

Parts needed: Indoor unit PCB/control board, PCB connectors and wiring harness

🛑 When to Call a Pro:
  • If error persists after reset
  • If there are signs of smoke, burning smell, overheating, or unusual noises
  • If you are not experienced with electrical component diagnosis

Next step

Choose the next step for A1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

HVAC Control Board

Controls fan, compressor, sensor, and communication functions in the HVAC unit.

Typical part-only price
$90 - $320
DIY difficulty
Hard
Estimated time
45-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number DAIKIN PCB-1234
voltage_rating 230V AC

Common Questions

What does A1 error mean on Daikin Air Conditioner?

A1 error indicates a communication failure between indoor and outdoor units due to a PCB malfunction.

Can I fix Daikin Air Conditioner A1 error myself?

You can attempt a basic reset by turning off the unit and waiting for 30-60 seconds.

How much does it cost to fix A1 error?

Repair costs typically range from ¥20,000 to ¥70,000, depending on parts and labor.

When should I call a technician for A1?

Call a technician if the error persists after a reset or if you notice smoke, burning smells, or unusual noises.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!