Daikin Air Conditioner Error A1-00

⚡ Quick Answer: The Daikin air conditioner A1-00 error indicates a communication failure between the indoor and outdoor units, often due to a malfunction in the main ... ⚠️ Difficulty Varies

What Does Error A1-00 Mean?

The Daikin air conditioner A1-00 error indicates a communication failure between the indoor and outdoor units, often due to a malfunction in the main printed circuit board (PCB). Symptoms include the indoor unit failing to start, the system stopping shortly after attempting to run, and unresponsive controls. If this error persists, it may require inspection or replacement of the indoor PCB.

Common Symptoms:

  • Indoor unit fails to start
  • System stops shortly after attempt to run
  • No normal operation from remote or panel controls

Possible Causes

  • Indoor unit main PCB (printed circuit board) malfunction (medium)

How to Fix Error A1-00

DIY Fix Power cycle and basic checks

  1. Ensure the unit is safely turned off via remote control or panel
  2. Switch off the breaker or unplug the air conditioner
  3. Wait ~30 seconds to ensure internal circuits discharge
  4. Restore power and attempt to restart the unit

Technician Only Indoor PCB inspection and replacement

  1. Disconnect power at breaker
  2. Access the indoor unit control board following service manual procedures
  3. Inspect PCB for visible damage, burnt components, poor solder joints, or connector issues
  4. Replace PCB if faulty and verify unit operation post‑replacement

Parts needed: Indoor unit main PCB

🛑 When to Call a Pro:
  • If A1‑00 persists after power cycling
  • If there are burning smells, visible damage, or unusual sounds from the indoor unit
  • If uncertainty exists about safely performing reset procedures

Next step

Choose the next step for A1-00

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

HVAC Control Board

Controls fan, compressor, sensor, and communication functions in the HVAC unit.

Typical part-only price
$90 - $320
DIY difficulty
Hard
Estimated time
45-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does A1-00 error mean on daikin air conditioner?

A1-00 indicates a communication failure due to a PCB malfunction, causing the unit to fail to start.

Can I fix daikin air conditioner A1-00 error myself?

Yes, you can try power cycling the unit and performing basic checks, but further issues may require professional help.

How much does it cost to fix A1-00 error?

The estimated repair cost for the A1-00 error ranges from $200 to $400, depending on parts and labor.

When should I call a technician for A1-00?

Call a technician if the A1-00 error persists after a power cycle or if you notice burning smells or visible damage.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!