Daewoo Refrigerator Error C1
⚡ Quick Answer: The Daewoo refrigerator C1 error indicates a potential compressor overheating issue, characterized by the error code displayed on the control panel, u... ✅ DIY Fixable
What Does Error C1 Mean?
The Daewoo refrigerator C1 error indicates a potential compressor overheating issue, characterized by the error code displayed on the control panel, unusual humming sounds, and a warm exterior. This error often results in inadequate cooling performance, necessitating attention to the temperature sensors and control board communication for resolution.
Common Symptoms:
- Error code C1 displayed on control panel
- Refrigerator not cooling normally with error code visible
Possible Causes
- Compressor
How to Fix Error C1
DIY Fix Basic Restart / Reset Attempt
- Unplug the refrigerator from the wall outlet.
- Wait at least 5 minutes to allow any control circuits to discharge.
- Plug the refrigerator back in and observe whether the C1 error clears.
Technician Only Inspect Temperature Sensors and Control Board Communication
- Verify sensor wiring harness and connectors for looseness or corrosion.
- Measure resistance of temperature sensors (thermistors) and compare to expected values.
- Confirm communication lines between sensors and main control board are intact.
- Replace defective thermistors or repair communication harness as needed.
Parts needed: temperature sensors (thermistors), control board wiring harness
- If the error persists after restart/reset attempts
- If there is no cooling and food safety is at risk
- If visible damage or electrical smell is present
Technical Specifications
| wattage | 150W |
|---|---|
| component | Compressor |
| resistance | 5-10 ohms |
| part_number | DAEWOO-123456 |
| voltage_rating | 120V AC |
Common Questions
What does C1 error mean on daewoo refrigerator?
The C1 error indicates a compressor overheating issue and affects the cooling performance.
Can I fix daewoo refrigerator C1 error myself?
Yes, you can try a basic restart by unplugging the refrigerator for 5 minutes and then plugging it back in.
How much does it cost to fix C1 error?
The estimated repair cost ranges from ¥5,000 to ¥25,000, depending on parts and labor.
When should I call a technician for C1?
Call a technician if the error persists after a reset, if there’s no cooling, or if you notice any visible damage or electrical smells.
Sources & References
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!