Crosley Dishwasher Error E8
⚡ Quick Answer: The Crosley dishwasher E8 error code indicates a potential issue with the drain pump or low water level condition. Users may notice unusual noises, fa... ✅ DIY Fixable
What Does Error E8 Mean?
The Crosley dishwasher E8 error code indicates a potential issue with the drain pump or low water level condition. Users may notice unusual noises, failure to drain water, or that the spray arms aren't functioning properly due to insufficient water. It's crucial to check the water supply and ensure the dishwasher is receiving water adequately.
Common Symptoms:
- Dishwasher displays E8 code during or after starting a cycle (community report)
- Water level appears low and spray arms may not rotate fully (unverified community description)
Possible Causes
- Drain Pump
- Clogged Drain Hose
- Faulty Control Board
How to Fix Error E8
DIY Fix Check water supply and restart
- Ensure the water supply valve feeding the dishwasher is fully open.
- Verify that the dishwasher is receiving water (listen for fill sounds).
- Cancel the current cycle and restart the dishwasher.
- If the error persists, power off the dishwasher at the breaker for several minutes and then restore power.
Technician Only Inspect water fill system and components
- Check inlet water valve for proper operation and flow.
- Inspect water level float/sensor for proper movement and connectivity.
- Test and verify heating element and temperature sensor continuity if error persists.
- Diagnose control board inputs/outputs related to water level and heating circuits.
Parts needed: Inlet water valve, Water level sensor/float assembly, Heating element, Temperature sensor/thermistor
- If the error code persists after basic water supply checks and power reset
- If there is visible water leakage or inability to fill with water
- If internal component testing (valve, sensor) indicates a fault
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Crosley 154639401 |
| voltage_rating | 120V AC |
Common Questions
What does E8 error mean on Crosley dishwasher?
E8 error on a Crosley dishwasher suggests a malfunction related to the drain pump or low water levels.
Can I fix Crosley dishwasher E8 error myself?
Yes, check the water supply, ensure the valve is open, and restart the dishwasher.
How much does it cost to fix E8 error?
Repair costs for E8 error range from ¥5,000 to ¥25,000 or more, depending on parts and labor.
When should I call a technician for E8?
Call a technician if the error persists after troubleshooting or if there’s visible leakage.
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!