Chiq Dishwasher Error E5

⚡ Quick Answer: The CHiQ dishwasher E5 error code indicates a potential malfunction in the drain pump system, characterized by unusual noises during operation and fai... ✅ DIY Fixable

What Does Error E5 Mean?

The CHiQ dishwasher E5 error code indicates a potential malfunction in the drain pump system, characterized by unusual noises during operation and failure to drain water effectively. This issue may also involve incorrect water level detection. Users may notice the dishwasher halting its cycle with this error displayed, often pointing to drainage issues that require attention.

Common Symptoms:

  • Dishwasher stops with error code E5 displayed
  • May coincide with water not draining normally
  • May coincide with excessive or incorrect water level detection

Possible Causes

  • Drain Pump
  • Clogged Drain Hose
  • Faulty Control Board

How to Fix Error E5

DIY Fix Basic checks for dishwasher showing E5 (general guidance)

  1. Turn off and safely disconnect power to the dishwasher before any inspection.
  2. Check for excess water in the base of the unit or around the interior.
  3. Ensure the dishwasher drainage hose is not kinked or blocked.
  4. Check the filter and drain area for debris and clean if necessary.
  5. Inspect that the dishwasher door is fully closed and latched properly.

Technician Only Professional inspection for water level and sensors

  1. Verify proper operation of the water level sensor or pressure switch.
  2. Inspect drain pump and related connections for faults or blockages.
  3. Check for internal water leakage that may have activated flood/flood‑sensor (if equipped).
  4. Evaluate the condition of the control board and wiring for faults related to the E5 display.

Parts needed: Water level sensor / pressure switch, Drain pump assembly, Control board and wiring harness

🛑 When to Call a Pro:
  • If water is visibly leaking from the dishwasher
  • If the error persists after basic user‑level checks and resetting power
  • If internal components like sensors or pumps are suspected faulty

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Chiq DP-12345
voltage_rating 120V AC

Common Questions

What does E5 error mean on CHiQ dishwasher?

E5 indicates a drain pump malfunction, often causing the dishwasher to stop and not drain water.

Can I fix CHiQ dishwasher E5 error myself?

Yes, you can check for excess water, ensure the drainage hose isn't blocked, and reset the power.

How much does it cost to fix E5 error?

Repair costs vary widely depending on region and parts needed for the fix.

When should I call a technician for E5?

Call a technician if there's visible water leakage or if the error persists after basic checks.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!