Chef Oven Error F13
⚡ Quick Answer: The Chef oven error code F13 indicates a malfunction related to the temperature sensor or meat probe. This issue often leads to erratic temperature re... ✅ DIY Fixable
What Does Error F13 Mean?
The Chef oven error code F13 indicates a malfunction related to the temperature sensor or meat probe. This issue often leads to erratic temperature readings and may cause the oven to stop heating or refuse to start altogether. The error can often be resolved by unplugging the meat probe, inspecting the probe plug and jack for debris or damage, and ensuring the probe is correctly inserted. If the error clears when the probe is removed, it suggests a fault in the probe circuit or wiring.
Common Symptoms:
- F13 displayed on control panel
- Oven may stop heating or refuse to start
- Error clears when meat probe is removed (community pattern)
Possible Causes
- Faulty or improperly detected temperature probe/meat probe circuit (medium)
How to Fix Error F13
DIY Fix Check meat probe and clear simple issues
- If a meat probe is plugged in, unplug it and see if the error clears.
- Inspect the probe plug and jack in the oven for debris or bent contacts.
- Ensure correct probe insertion and try again without the probe to see if code clears.
Technician Only Inspect and repair probe wiring or replace components
- Disconnect power and remove oven access panels.
- Trace wiring from the probe jack to the electronic oven control (EOC) board; check for damage or loose connections.
- Test or replace the probe jack assembly and probe if physically damaged.
- If wiring and probe jack are good, test the EOC’s probe detection circuit and replace control board if necessary.
Parts needed: Meat probe (if applicable), Probe jack assembly, Electronic Oven Control (EOC) board
- If you cannot access internal wiring safely
- If error persists after probe removal and basic checks
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000 ohms at room temperature |
| part_number | Chef TS-1234 |
| voltage_rating | 120V AC |
Common Questions
What does F13 error mean on Chef oven?
F13 indicates a temperature sensor or meat probe malfunction, causing heating issues.
Can I fix Chef oven F13 error myself?
Yes, you can unplug the meat probe and check for debris or damage to clear the error.
How much does it cost to fix F13 error?
$50–$300+ depending on whether you need to replace the meat probe, probe jack, or EOC board.
When should I call a technician for F13?
Call a technician if you cannot safely access internal wiring or if the error persists after basic troubleshooting.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!