Chef Cooktop Error F01

What Does Error F01 Mean?

The F01 error code on your Chef cooktop signifies a potential malfunction in the control board, which may lead to unresponsive touch controls or erratic display behavior. This issue can often be resolved with basic troubleshooting steps, including a power reset and ensuring that the control panel is dry and free from spills.

Possible Causes

• Control Board

How to Fix Error F01

DIY Fix Basic checks and power reset

1. Turn off and disconnect the cooktop from its power source (e.g. switch off breaker or unplug).
2. Wait a few minutes and then reconnect power to see if the code clears.
3. Ensure the cooktop surface is dry and free of spills or moisture on the control panel.

Technician Only Professional diagnosis

1. Technician should inspect the cooktop’s control board and wiring harness for damage.
2. Check sensors and internal connections specific to the model.
3. Refer to Chef service documentation or contact Chef technical support for code definition.

🛑 When to Call a Pro:

• If the error persists after a power reset or reappears immediately, discontinue use and contact Chef support or a qualified appliance technician.

Next step

Choose the next step for F01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Model number required

Browse by model — no specific failed part is claimed

Model-compatible Cooktop parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Enter your complete model number for compatible results

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note	The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number	None

Common Questions

What does F01 error mean on chef cooktop?

The F01 error indicates a malfunction in the cooktop's control board, often affecting touch controls.

Can I fix chef cooktop F01 error myself?

Yes, try a power reset by disconnecting the cooktop from power and ensuring the control panel is dry.

How much does it cost to fix F01 error?

Repair costs for the F01 error vary by model and region; consult a technician for an estimate.

When should I call a technician for F01?

If the F01 error persists after a power reset or reappears quickly, contact Chef support or a qualified technician.

Sources & References

• Induction cooktop error code lists and general cooktop error guidance (community)

Data last verified: 2026-07-31