Breville Toaster Error E06

⚡ Quick Answer: The Breville toaster E06 error indicates a malfunction in the heating element, often caused by a faulty temperature sensor, internal safety cutoff, or... ✅ DIY Fixable

What Does Error E06 Mean?

The Breville toaster E06 error indicates a malfunction in the heating element, often caused by a faulty temperature sensor, internal safety cutoff, or control board issue. Users may notice the appliance shuts down prematurely or fails to toast, and controls may become unresponsive. To troubleshoot, a basic power reset can be attempted, but if the issue persists, professional inspection is recommended.

Common Symptoms:

  • Appliance displays "E06" and shuts down or will not complete cycle
  • Error appears immediately upon start or within seconds
  • Standard user controls become non‑responsive

Possible Causes

  • Temperature sensor (thermistor) malfunction or misreading (medium)
  • Internal safety cutoff / thermal fuse or internal connection disturbance (medium)
  • Control board or internal electronics fault (medium)

How to Fix Error E06

DIY Fix Basic power reset and check power source

  1. Unplug the toaster/toaster oven from the power outlet.
  2. Wait at least 10 minutes to allow capacitors to discharge.
  3. Plug the unit back into a different known‑good outlet (avoid GFCI outlets).
  4. Attempt to power on and observe whether 'E06' reappears.

Technician Only Inspect and service internal temperature sensor and safety components

  1. Open the appliance housing after disconnecting power.
  2. Locate and inspect the internal temperature sensor (thermistor) for visible damage, loose connections, or contamination.
  3. Check continuity of the thermal fuse / safety cutoff with a multimeter and ensure secure wiring connections.
  4. Test or replace control board or sensors if readings are out of spec.
  5. Reassemble and test unit under safe conditions.

Parts needed: Temperature sensor / thermistor, Thermal fuse / safety cutoff, Control board (if needed)

🛑 When to Call a Pro:
  • If error persists after basic reset and outlet checks
  • If internal inspection reveals damaged components
  • If unsure about safely performing internal diagnostics

Technical Specifications

wattage 1800W
component Heating Element
resistance 10-30 ohms
part_number BTA830XL-HE
voltage_rating 120V AC

Common Questions

What does E06 error mean on Breville toaster?

The E06 error indicates a malfunction in the heating element, typically linked to sensor or control board issues.

Can I fix Breville toaster E06 error myself?

Yes, try performing a basic power reset by unplugging the toaster for 10 minutes and plugging it back into a different outlet.

How much does it cost to fix E06 error?

Repair costs range from $50 to $200+, depending on parts and service fees.

When should I call a technician for E06?

Call a technician if the error persists after a reset or if internal components show damage.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!