Breville Oven Error F10
⚡ Quick Answer: The Breville oven error F10 signifies a malfunction in the temperature sensor, leading to erratic temperature readings or the oven failing to heat. Th... ⚠️ Difficulty Varies
What Does Error F10 Mean?
The Breville oven error F10 signifies a malfunction in the temperature sensor, leading to erratic temperature readings or the oven failing to heat. This error can result from a faulty temperature sensor or misinterpretation of sensor data by the control board, causing the oven to shut down or display false high-temperature warnings. Proper diagnostics and component testing are necessary for resolution.
Common Symptoms:
- Error code F10 displayed on oven control panel
- Oven shuts down or stops heating
- Temperature not rising or irregular heating
- Possible false high-temperature reading (control thinks oven is overheating)
Possible Causes
- Faulty oven temperature sensor (RTD/probe) (medium)
- Control board (Electronic Oven Control or EOC) misinterpreting temperature sensor data (medium)
How to Fix Error F10
DIY Fix Check power reset and basic symptoms
- Turn off and unplug the oven or turn off its circuit breaker.
- Wait a few minutes and power the oven back on to see if F10 clears.
- Ensure the oven door is fully closed and nothing is obstructing the cavity.
- Observe if oven heats normally or repeatedly triggers F10.
Technician Only Test and replace temperature sensor
- Disconnect oven from power supply.
- Locate the temperature sensor (usually inside oven cavity at back).
- Disconnect sensor and use a multimeter to measure resistance at room temperature (commonly around ~1100 ohms, value varies by model).
- Replace the sensor if resistance is out of expected range or open/infinite.
- Reassemble, restore power, and test oven operation.
Parts needed: Temperature sensor (RTD/probe)
Technician Only Inspect wiring and control board
- Check wiring harness and connections between temperature sensor and control board for damage, looseness, corrosion, or shorts.
- If wiring is intact and sensor tests good but F10 persists, evaluate the control board for faults or stuck relays.
- Replace control board if confirmed faulty.
Parts needed: Wiring harness, Control board (EOC)
- If the error persists after basic user-level resets and checks.
- If internal components (sensor, wiring, control board) testing requires disassembly beyond user skill level.
- If there are signs of overheating, burning smell, visible damage, or other safety hazards.
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 1800W |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-2000 ohms |
| part_number | BOV800XL-SENSOR |
| voltage_rating | 120V AC |
Common Questions
What does F10 error mean on breville oven?
F10 indicates a malfunction in the temperature sensor, causing erratic readings or failure to heat.
Can I fix breville oven F10 error myself?
Yes, you can try resetting the oven or checking for obstructions, but further diagnostics may require a technician.
How much does it cost to fix F10 error?
Repair costs range from $20 to $100 for parts, with additional labor costs if professional service is needed.
When should I call a technician for F10?
Call a technician if the error persists after resets or if testing requires disassembly beyond your skill level.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!