Question 1

How to fix Bosch Steam Oven not descaling?

Accepted Answer

Common causes: Faulty water sensor preventing proper detection of water levels (80 mentions), Clogged or dirty water inlet filter restricting water flow (70 mentions), Malfunctioning control board not executing the descaling cycle correctly (60 mentions). Top solutions: Check and clean the water inlet filter. Disconnect the oven from power, locate the filter, remove it, and rinse under warm water until clean. Reinstall and test the descaling function., Inspect and test the water sensor. If necessary, replace the sensor by disconnecting power, removing the sensor from its housing, and installing a new one. Reconnect power and test the descaling function., Reset the control board. Disconnect the oven from power for at least 10 minutes, then reconnect and check if the descaling cycle initiates properly. If issues persist, consider replacing the control board..

Question 2

How to fix Bosch Steam Oven not sensing water tank?

Accepted Answer

Common causes: Water tank is not seated properly in the oven (80 mentions), Water level sensor is malfunctioning or blocked (70 mentions), Electrical connection issue or wiring fault to the sensor (50 mentions). Top solutions: Ensure the water tank is correctly seated. Remove the tank, check for any obstructions, and reinsert it firmly until it clicks into place., Inspect the water level sensor for any blockages or debris. Clean the sensor gently with a soft cloth and ensure it is functioning properly., Check the electrical connections to the water level sensor. If any wires are loose or damaged, reconnect or replace them as necessary..

Bosch Steam Oven Troubleshooting Guide

Quick Stats

General Maintenance Tips

Official Resources

Common Symptoms (2)

Top Questions from Community