Bosch Refrigerator Error E13
⚡ Quick Answer: The Bosch refrigerator error code E13 indicates a potential malfunction in the temperature sensor, which can lead to inconsistent cooling and unusual ... ⚠️ Difficulty Varies
What Does Error E13 Mean?
The Bosch refrigerator error code E13 indicates a potential malfunction in the temperature sensor, which can lead to inconsistent cooling and unusual display behavior. If you encounter this error, it is important to note when it appears, check your refrigerator's manual for specific references, and consider performing a power cycle by unplugging the unit for a few minutes. If the error persists, further diagnosis or professional help may be needed.
Possible Causes
- Temperature Sensor
How to Fix Error E13
DIY Fix Basic checks and information gathering
- Note exactly when the E13 code appears (startup, temperature change, water/ice actions).
- Check the refrigerator’s display or manual for any mention of the code (specific to your model).
- Power‑cycle the fridge by unplugging it for several minutes and then restarting it to see if the code clears.
- Take photos of the display and any LEDs/flashing patterns to aid service support.
Technician Only Manufacturer/Service diagnostic
- Contact Bosch customer support or authorized service with model and E13 code details.
- Service technician should retrieve the official diagnostic definition for error code E13 from Bosch service literature or diagnostic software.
- Technician to run full diagnostic on sensors, main control board, communication buses, and ice/water systems as appropriate.
- Replace any failed components as identified by official service procedures.
- If the E13 code persists after a basic power reset.
- If there are accompanying symptoms (no cooling, abnormal noises, water/ice function failure).
- If the error code repeats frequently or the refrigerator stops functioning.
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 5-10 kOhms |
| part_number | 004100001793 |
| voltage_rating | 120V AC |
Common Questions
What does E13 error mean on bosch refrigerator?
E13 indicates a potential malfunction in the temperature sensor, affecting cooling.
Can I fix bosch refrigerator E13 error myself?
Yes, try power-cycling the fridge and checking the manual for specifics.
How much does it cost to fix E13 error?
Repair costs vary by model and region; consult a technician for estimates.
When should I call a technician for E13?
Call a technician if the code persists after a reset or if symptoms worsen.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!